※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 2507-3 は、技術委員会 ISO/TC 138, 流体の輸送のためのプラスチック パイプ、継手およびバルブ、小委員会 SC 5, プラスチック材料のパイプ、継手およびバルブの一般特性、およびそれらの付属品 — 試験方法および基本仕様。
ISO 2507 は、次の部分で構成されており、一般的なタイトルは「熱可塑性パイプおよび継手 — ビカット軟化温度」です。
- Part 1: 一般的な試験方法
- Part 2: 非可塑化ポリ (塩化ビニル) (PVC-U) または塩素化ポリ (塩化ビニル) (PVC-C) パイプおよび継手、および高耐衝撃性ポリ (塩化ビニル) (PVC-HI) パイプの試験条件
- Part 3: アクリロニトリル/ブタジエン/スチレン (ABS) およびアクリロニトリル/スチレン/アクリル酸エステル (ASA) パイプおよび継手の試験条件
ISO 2507 のこの部分の附属書 A および Â は、情報提供のみを目的としています。
1 スコープ
ISO 2507 のこの部分では、アクリロニトリル/ブタジエン/スチレン (ABS) およびアクリロニトリル/スチレン/アクリル エステル (ASA) パイプおよび継手のビカット軟化温度を決定するための特定の試験条件を指定しています。
また、情報として、対応する基本仕様も示します。
注記 1熱可塑性パイプおよび継手のビカット軟化温度を決定するための一般的な試験方法は、ISO 2507-1 に記載されています。
2 規範的参照
次の規格には、このテキストでの参照を通じて、ISO 2507 のこの部分の規定を構成する規定が含まれています。発行の時点で、示された版は有効でした。すべての規格は改訂される可能性があり、ISO 2507 のこの部分に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 2507-1:1995, 熱可塑性パイプおよび継手 — ビカット軟化温度 — 1: 一般的な試験方法。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 2507-3 was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the transport of fluids, Subcommittee SC 5, General properties of pipes, fittings and valves of plastic materials and their accessories — Test methods and basic specifications.
ISO 2507 consists of the following parts, under the general title Thermoplastics pipes and fittings — Vicat softening temperature:
- Part 1: General test method
- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC-HI) pipes
- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
Annexes A and В of this part of ISO 2507 are for information only.
1 Scope
This part of ISO 2507 specifies the particular test conditions for determining the Vicat softening temperature of acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings.
It also gives, for information, the corresponding basic specifications.
NOTE 1 The general test method for determining the Vicat softening temperature of thermoplastics pipes and fittings is given in ISO 2507-1.
2 Normative reference
The following standard contains provisions which, through reference in this text, constitute provisions of this part of ISO 2507. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this part of ISO 2507 are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 2507-1:1995, Thermoplastics pipes and fittings — Vicat softening temperature — 1: General test method.