※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、以下を参照してください。次の URL: www.iso.org/iso/foreword.html
この文書は、技術委員会 ISO/TC 61, プラスチック、小委員会 SC 11, 製品によって作成されました。
この第 2 版は、マイナー リビジョンを構成する第 1 版 (ISO 25179:2010) をキャンセルし、置き換えます。前版との主な変更点は以下の通りです。
- 第 3 項に「感圧接着剤」と「溶解性」の定義が追加されました。
- 付録 A は改訂され、署名用の欄が追加されました。
- 参考文献が追加されました。
安全に関する声明この文書を使用する人は、該当する場合、通常の実験室での実践に精通している必要があります。この文書は、その使用に関連する安全上の問題がある場合、そのすべてに対処することを目的とするものではありません。適切な安全衛生慣行を確立し、その他の制限の適用性を判断するのはユーザーの責任です。この文書で許可されている材料の中には、環境に悪影響を及ぼす可能性があるものがあることが認識されています。技術の進歩により、そのような材料の代替品がより受け入れられるようになるにつれて、それらは可能な限り排除されるでしょう。テスト終了後は、すべての廃棄物を適切な方法で廃棄するように注意してください。
1 スコープ
この文書は、水に浸したときの接着剤の質量の減少を測定することによって、水溶性粘着剤の水への溶解度、またはアルカリ可溶性粘着剤のアルカリへの溶解度を決定するための試験方法を規定しています。またはアルカリ。粘着剤の溶解性は、粘着剤を使用してラベルを貼り付けた製品のリサイクル可能性を評価する際の重要な要素の 1 つです。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 291, プラスチック — 調整および試験用の標準雰囲気
3 用語と定義
この文書の目的上、次の用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
感圧接着剤
乾燥状態では室温で永続的に粘着性があり、短時間の軽い圧力で表面に容易に接着する接着剤
3.2
溶解度
化学的性質:特定の物質、溶質が溶媒に溶解する能力を指す
注記 1:平衡状態で溶媒に溶解している溶質の最大量として測定されます。
参考文献
| 1 | ISO 472, プラスチック — 語彙 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 11, Products.
This second edition cancels and replaces the first edition (ISO 25179:2010) of which it constitutes a minor revision. The main changes compared to the previous edition are as follows:
- definitions have been added in Clause 3 for “pressure sensitive adhesive” and “solubility”;
- Annex A has been revised to include columns for signature;
- a Bibliography has been added.
SAFETY STATEMENT Persons using this document should be familiar with normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to determine the applicability of any other restrictions. It is recognized that some of the materials permitted in this document may have a negative environmental impact. As technological advances lead to more acceptable alternatives for such materials, they will be eliminated to the greatest extent possible. At the end of the test, care should be taken to dispose of all waste in an appropriate manner.
1 Scope
This document specifies a test method for the determination of the solubility of a water-soluble pressure-sensitive adhesive in water or the solubility of an alkali-soluble pressure-sensitive adhesive in alkali by measuring the loss in mass of the adhesive when immersed in water or alkali. The solubility of the adhesive is one of the key factors in assessing the possibility of recycling products to which labels are fixed using a pressure-sensitive adhesive.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 291, Plastics — Standard atmospheres for conditioning and testing
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
pressure sensitive adhesive
adhesive which in a dry state is permanently tacky at room temperature and adheres readily to surfaces under brief and light pressure
3.2
solubility
chemical property referring to the ability for a given substance, the solute, to dissolve in a solvent
Note 1 to entry: It is measured in terms of the maximum amount of solute dissolved in a solvent at equilibrium.
Bibliography
| 1 | ISO 472, Plastics — Vocabulary |