※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 251 は、技術委員会 ISO/TC 41, プーリーおよびベルト (Veebelts を含む) 、サブ委員会 SC 3, コンベヤーベルトによって作成されました。
この第 4 版は、マイナー改訂版である第 3 版 (ISO 251:2003) を廃止し、置き換えるものです。
1 スコープ
この国際規格は、繊維カーカスを備えたコンベヤー ベルトの幅と長さを指定します。また、対応する公差も指定します。
切断された軽量コンベア ベルトの幅と長さの公差は ISO 15147 に規定されているため、ISO 21183-1 [ 1] に記載されている軽コンベア ベルトには適用されません。 [ 2]
注意コンベアベルトの長さは規格化されていません。
参考文献
| 1 | ISO 21183-1, 軽量コンベヤベルト — Part 1: 主な特性と用途 |
| 2 | ISO 15147, 軽量コンベヤ ベルト — 切断された軽量コンベヤ ベルトの幅と長さの許容差 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 251 was prepared by Technical Committee ISO/TC 41, Pulleys and belts (including veebelts), Subcommittee SC 3, Conveyor belts.
This fourth edition cancels and replaces the third edition (ISO 251:2003), of which it constitutes a minor revision.
1 Scope
This International Standard specifies the widths and lengths of conveyor belts with a textile carcass. It also specifies the corresponding tolerances.
It is not applicable to light conveyor belts as described in ISO 21183-1,[1] as tolerances on the widths and lengths of cut light conveyor belts are given in ISO 15147.[2]
NOTE The lengths of conveyor belts are not standardized.
Bibliography
| 1 | ISO 21183-1, Light conveyor belts — Part 1: Principal characteristics and applications |
| 2 | ISO 15147, Light conveyor belts — Tolerances on widths and lengths of cut light conveyor belts |