※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って起草されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に回覧されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 25297-2 は、技術委員会 ISO/TC 172, 光学およびフォトニクス、小委員会 SC 1, 基本規格によって作成されました。
ISO 25297 は、次の部分で構成されており、一般的なタイトルは「光学およびフォトニクス - 光学データの電子交換」です。
- Part 1: NODIF 情報モデル
- Part 2: ISO 23584 で定義されているクラスとプロパティへのマッピング
1 スコープ
この国際規格は、ISO 25297-1 で使用される用語と ISO 23584-2 で定義された特性との関係を指定し、両方の規格の使用を容易にする手段を提供します。
注記この国際規格は、ISO 23584-2 のプロパティのすべての属性を定義しているわけではありません。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 25297-1:2010, 光学およびフォトニクス — 光学データの電子交換 — Part 1: NODIF 情報モデル
- ISO 23584-1, 光学およびフォトニクス — リファレンス ディクショナリの仕様 — Part 1: 組織と構造に関する概要
- ISO 13584-42, 産業用自動化システムおよび統合 — 部品ライブラリ — Part 42: 記述方法論: 部品ファミリを構築するための方法論
3 用語と定義
このドキュメントの目的のために、ISO 25297-1, ISO 23584-1, および ISO 13584-42 に記載されている用語と定義が適用されます。
参考文献
| [1] | ISO 10303-203, 産業オートメーション システムと統合 — 製品データの表現と交換 — Part 203: アプリケーション プロトコル: 機械部品およびアセンブリの構成制御 3D 設計 |
| [2] | ISO 10110-5:1996, 光学および光学機器 — 光学要素およびシステムの図面の準備 — Part 5: 表面形状公差1) |
| [3] | ISO 10110-12:2007, 光学およびフォトニクス — 光学要素およびシステムの図面の準備 — Part 12: 非球面 |
| [4] | ISO 23584-2, 光学およびフォトニクス — リファレンス ディクショナリの仕様 — Part 2: クラスおよびプロパティの定義 |
| [5] | ISO/IEC Guide 77-2, 製品の特性とクラスの仕様に関するガイド — Part 2: 技術原則とガイダンス |
| [6] | IEC 61360-1, 電気アイテムの分類スキームに関連付けられた標準データ要素タイプ — Part 1: 定義 — 原則と方法 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 25297-2 was prepared by Technical Committee ISO/TC 172, Optics and photonics, Subcommittee SC 1, Fundamental standards.
ISO 25297 consists of the following parts, under the general title Optics and photonics — Electronic exchange of optical data:
- Part 1: NODIF information model
- Part 2: Mapping to the classes and properties defined in ISO 23584
1 Scope
This International Standard specifies the relationship between the terms used in ISO 25297-1 and the properties defined in ISO 23584-2, and provides the means to facilitate the use of both standards.
NOTE This International Standard does not define all attributes of properties in ISO 23584-2.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 25297-1:2010, Optics and photonics — Electronic exchange of optical data — Part 1: NODIF information model
- ISO 23584-1, Optics and photonics — Specification of reference dictionary — Part 1: General overview on organization and structure
- ISO 13584-42, Industrial automation systems and integration — Parts library — Part 42: Description methodology: Methodology for structuring parts families
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 25297-1, ISO 23584-1 and ISO 13584-42 apply.
Bibliography
| [1] | ISO 10303-203, Industrial automation systems and integration — Product data representation and exchange — Part 203: Application protocol: Configuration controlled 3D design of mechanical parts and assemblies |
| [2] | ISO 10110-5:1996, Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances1) |
| [3] | ISO 10110-12:2007, Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces |
| [4] | ISO 23584-2, Optics and photonics — Specification of reference dictionary — Part 2: Classes' and properties' definitions |
| [5] | ISO/IEC Guide 77-2, Guide for specification of product properties and classes — Part 2: Technical principles and guidance |
| [6] | IEC 61360-1, Standard data elements types with associated classification scheme for electric items — Part 1: Definitions — Principles and methods |