※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に回覧されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 255 は、技術委員会 ISO/TC 41, プーリーおよびベルト (ビーベルトを含む)によって作成されました。
この第 2 版は、第 1 版 (ISO 255:1981) を取り消して置き換えたものであり、そのうちの技術的な改訂版です。
附属書 A は、この規格の不可欠な部分を形成します。附属書 B は情報提供のみを目的としています。
序章
V ベルトを使用するドライブでは、プーリの溝の寸法は、データム幅または有効幅に基づいて定義できます。その結果、プーリとベルトの寸法の定義と記述のための 2 つのシステムが開発されました。 2 つのシステムは互いに独立しています。
データム幅に基づいて定義された溝の幾何学的検査では、溝付きプーリーが標準仕様に適合していることを機械的手段で確認するために必要なテストが指定されていましたが、溝付きプーリーの生産管理のための最新の迅速または連続チェック手順は指定されていませんでした。
1 スコープ
この国際規格は、データム幅に基づいてシステムで指定された V ベルトの溝とプーリの規則性をチェックする方法を指定します。溝付きプーリは、従来の V ベルトまたは幅の狭い V ベルトで使用するように設計されています。
溝付きプーリの検査パラメータと公差は、適切な国際規格で指定されています。
2 規範的参照
次の規格には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。発行時点では、示されたエディションが有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 4183:1989, ベルト ドライブ - クラシックおよびナロー V ベルト - 溝付きプーリー (データム幅に基づくシステム)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 255 was prepared by Technical Committee ISO/TC 41, Pulleys and belts (including veebelts).
This second edition cancels and replaces the first edition (ISO 255:1981), of which it constitutes a technical revision.
Annex A forms an integral part of this International Standard. Annex B is for information only.
Introduction
In drives using V-belts, the dimensions of the pulley grooves can be defined either on the basis of the datum width or on the basis of the effective width. As a result, two systems for definition and description of the dimensions of pulleys and belts have been developed. The two systems are independent of each other.
For the geometrical inspection of grooves defined on the basis of the datum width, necessary tests to ensure by mechanical means the conformity of a grooved pulley with standard specifications were specified, but modern quick or serial checking procedures for grooved pulley production control were not.
1 Scope
This International Standard specifies the methods of checking the regularity of the grooves and pulleys for V-belts specified in the system based on datum width. The grooved pulleys may be designed for use with classical or narrow V-belts.
Inspection parameters and tolerances of grooved pulleys are specified in appropriate International Standards.
2 Normative reference
The following standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 4183:1989, Belt drives — Classical and narrow V-belts — Grooved pulleys (system based on datum width).