この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 25639-2 は、プロジェクト委員会 ISO/PC 237, 展示会用語によって作成されました。
ISO 25639 は、「展示会、ショー、見本市、およびコンベンション」という一般タイトルの下に、次の部分で構成されています。
- Part 1: 語彙
- Part 2: 統計目的の測定手順
導入
展示会業界の文脈では、ISO 25639-1 は、一般的に使用される用語と定義を指定するという標準化における重要な基本機能を果たします。同様に重要なのは、解釈の統一性を確保するために、ISO 25639-1 で定義された用語に適用できる標準測定手順を確立することです。
ISO 25639 のこの部分は後者の機能を果たすため、ISO 25639-1 と統合して使用することを目的としています。
1 スコープ
ISO 25639 のこの部分は、ISO 25639-1 で定義されているように、展示会業界で一般的に使用される用語に適用される標準測定手順を確立します。
ISO 25639 のこの部分は、ISO 25639-1 と統合して使用することを目的としています。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 25639-1, 展示会、ショー、フェアおよびコンベンション — Part 1: 語彙
3 用語と定義
この文書の目的には、ISO 25639-1 に示されている用語と定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 25639-2 was prepared by Project Committee ISO/PC 237, Exhibition terminology.
ISO 25639 consists of the following parts, under the general title Exhibitions, shows, fairs and conventions:
- Part 1: Vocabulary
- Part 2: Measurement procedures for statistical purposes
Introduction
In the context of the exhibition industry, ISO 25639-1 fulfils the important basic function in standardization of specifying commonly-used terms and definitions. Of equal importance is establishing standard measurement procedures applicable to the terms defined in ISO 25639-1, in order to ensure uniformity in interpretation.
This part of ISO 25639 fulfils the latter function and is consequently intended for integral use with ISO 25639-1.
1 Scope
This part of ISO 25639 establishes standard measurement procedures applicable to terms commonly used in the exhibition industry, as defined in ISO 25639-1.
This part of ISO 25639 is intended for integral use with ISO 25639-1.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 25639-1, Exhibitions, shows, fairs and conventions — Part 1: Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 25639-1 apply.