※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO 加盟団体) の世界的な連合です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のために加盟機関に回覧されます。
国際規格 ISO 2587 は、技術委員会 ISO/TC 29, 小型ツールによって策定されました。
1972 年 2 月に、次の国の加盟機関によって承認されました。
| オーストリア | イタリア | スイス |
| ベルギー | 日本 | 七面鳥 |
| エジプト、アラブ共和国 | ポーランド | イギリス |
| フランス | ルーマニア | アメリカ |
| ハンガリー | 南アフリカ共和国 | ソビエト連邦 |
| インド | スペイン | |
| イスラエル | スウェーデン |
次の国のメンバー団体は、技術的な理由で文書の不承認を表明しました:
チェコスロバキア
1 適用範囲と適用分野
この国際規格は、カッター アーバーへの取り付けを目的とした、プレーン ボアとキー ドライブを備えたメトリック シリーズのサイド フライス カッターと正面フライス カッターの寸法を指定します。
まっすぐな歯のカッターと二重交互ねじれ (千鳥歯) のカッターに適用できます。
これらのカッターの外径の範囲は、ISO/R 523, フライスカッターの外径の推奨範囲から取得されます。
2 参照
- ISO/R 240, フライスとカッター アーバーまたはカッター マンドレルの互換性寸法 - メートル系とインチ系。
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO Member Bodies). The work of developing International Standards is carried out through ISO Technical Committees. Every Member Body interested in a subject for which a Technical Committee has been set up has the right to be represented on that Committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated to the Member Bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 2587 was drawn up by Technical Committee ISO/TC 29, Small tools.
It was approved in February 1972 by the Member Bodies of the following countries:
| Austria | Italy | Switzerland |
| Belgium | Japan | Turkey |
| Egypt, Arab Rep. of | Poland | United Kingdom |
| France | Romania | U.S.A. |
| Hungary | South Africa, Rep. of | U.S.S.R. |
| India | Spain | |
| Israel | Sweden |
The Member Body of the following country expressed disapproval of the document on technical grounds:
Czechoslovakia
1 SCOPE AND FIELD OF APPLICATION
This International Standard specifies the dimensions of metric series side and face milling cutters with plain bore and key drive, intended for fitting to cutter arbors.
It is applicable to cutters with straight teeth and cutters with double alternate helix (staggered tooth).
The range of outside diameters of these cutters is taken from ISO/R 523, Recommended range of outside diameters formilling cutters.
2 REFERENCE
- ISO/R 240, Interchangeability dimensions for milling cutters and cutter arbors or cutter mandrels - Metric series and inch series.