※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 25 は、ISO/TC 36 の技術委員会「映画撮影」によって作成されました。
この第 2 版は、技術的な改訂を構成する第 1 版 (ISO 25:1976) を取り消し、置き換えるものです。
1 スコープ
この国際規格は、一方または両方の端に沿って穴が開けられた 16 mm のサイレントおよびサウンド映画フィルムの乳剤の位置、露光のフレーム レート、および露光される乳剤領域の方向を指定します。
2 規範的参照
以下の規格には、本文中の参照を通じてこの国際規格の条項を構成する条項が含まれています。発行時点では、示されているエディションは有効です。すべての規格は改訂される可能性があり、この国際規格に基づく協定の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 26:1993, 映画撮影法 — 直接前面投影用の 16 mm 映画フィルムのプロジェクター使用法 — 仕様。
- ISO 69:1990, 映画撮影 — 16 mm 映画および磁気フィルム — 切断および穿孔の寸法。
- ISO 466:1976, 映画撮影 — 16 mm 映画カメラの絞りによって生成された画像 — 位置と寸法。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 25 was prepared by Technical Committee ISO/TC 36, Cinematography.
This second edition cancels and replaces the first edition (ISO 25:1976), of which it constitutes a technical revision.
1 Scope
This International Standard specifies the position of the emulsion, the frame rate of exposure, and the orientation of the emulsion area being exposed for 16 mm silent and sound motion-picture film perforated along one or both edges.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 26:1993, Cinematography — Projector usage of 16 mm motion-picture films for direct front projection — Specifications.
- ISO 69:1990, Cinematography — 16 mm motion-picture and magnetic film — Cutting and perforating dimensions.
- ISO 466:1976, Cinematography — Image produced by 16 mm motion-picture camera aperture — Position and dimensions.