※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語および表現の意味に関する説明、および技術的貿易障壁 (TBT) における ISO の WTO 原則への準拠に関する情報については、次の URL を参照して ください 。
この文書を担当する委員会は、ISO/TC 28, 石油製品および潤滑油です。
この第 2 版は、技術的に改訂された第 1 版 (ISO 26422:2011) を取り消して置き換えるものです。改訂の目的は、ISO 26422 の試験方法を CEC L-45-99 の基準流体、基準手順、および精度ステートメントに関して調和させ、それによって技術的に同等な 2 つの試験方法の違いを回避することです。
ISO 26422 は DIN 51350-6 [1]に基づいており、これは Co-ordinating European Council (CEC) によって CEC-L-45-99 としても採用されています。 ISO/TC 28 は、この国際規格の準備を支援するために、CEC 試験方法 L-45-99 [2]の選択された部分を複製するために調整欧州評議会によって付与された許可を認めています。
警告この国際規格の使用には、危険な物質、操作、および機器が含まれる場合があります。この国際規格は、その使用に関連するすべての安全問題に対処することを意図していません。適切な安全衛生慣行を確立し、使用前に規制制限の適用可能性を判断することは、この国際規格の使用者の責任です。
1 スコープ
この国際規格は、ポリマー含有潤滑油のせん断安定性を、ISO 20623 で指定されている 4 ボール マシンによって決定する方法を指定していますが、円錐ころ軸受を使用しています。試験結果により、稼働中の永久粘度損失を予測できます。
注記ポリマー含有オイルの粘度損失を評価するその他の国際規格が存在します。この国際規格で指定されている方法は、流体を、たとえば、ISO 20844で[されているディーゼル インジェクター ノズルせん断試験よりも高いせん断速度にさらします]ギアとローラーベアリング。このような用途では、ISO 20844 試験方法のせん断速度が低すぎて、流体の粘度の現実的な永久損失を発生させることができません。
2 参考文献
以下の文書の全体または一部は、この文書で規範的に参照されており、その適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
3.1
パーセンテージ粘度損失
RV
| ν0 | mm 2 s -1で表される、せん断前の流体の 100°C での動粘度です。 | |
| v1 | は、せん断後の流体の 100°C での動粘度であり、mm 2 s -1で表されます。 |
注記 1:値が小さいほど、粘度せん断損失に対する耐性が高いことを示します。
注記 2:円すいころ軸受試験は、KRL (円すいころ軸受) の原理とも呼ばれます。
参考文献
| [1] | DIN 51350-6, 潤滑剤のテスト — シェル 4 ボール テスターでのテスト — 6: ポリマー含有潤滑油のせん断安定性の測定 |
| [2] | CEC-L-45-99, トランスミッション潤滑剤の粘度せん断安定性 |
| [3] | ISO 20844, 石油および関連製品 — ディーゼル噴射ノズルを使用したポリマー含有オイルのせん断安定性の測定 |
| [4] | ISO 4259, 石油製品 - 試験方法に関する精度データの決定と適用 |
| [5] | CETOP RP 112 H, 作動油の粘度せん断安定性 (テーパーローラーベアリングリグ) |
| [6] | ISO 355, 転がり軸受 — 円すいころ軸受 — 主要寸法とシリーズの指定 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 28, Petroleum products and lubricants.
This second edition cancels and replaces the first edition (ISO 26422:2011), which has been technically revised. The objective of the revision is to harmonize the test methodology of ISO 26422 with that of CEC L-45-99 regarding reference fluids, referencing procedure, and the precision statement, thereby avoiding differences between two test methods which are technically equivalent.
ISO 26422 is based upon DIN 51350-6,[1] which has also been adopted by the Co-ordinating European Council (CEC) as CEC-L-45-99. ISO/TC 28 acknowledges permission granted by Coordinating European Council to reproduce selected parts of CEC Test Method L-45-99[2] to assist with the preparation of this International Standard.
WARNING The use of this International Standard can involve hazardous materials, operations, and equipment. This International Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this International Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
1 Scope
This International Standard specifies a method of determining the shear stability of polymer-containing lubricating oils by the four-ball machine as specified in ISO 20623, but using a tapered roller bearing. The test results allow prediction of the in-service permanent viscosity loss.
NOTE Other International Standards exist which evaluate viscosity loss of polymer-containing oils. The method specified within this International Standard subjects fluids to a higher shear rate than, for example, the diesel injector nozzle shear test described within ISO 20844.[3] It is particularly appropriate for lubricants being used in high shear applications, such as components with gears and roller bearings. In such applications, the shear rate in the ISO 20844 test method can be too low to generate a realistic permanent loss in viscosity of the fluid.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 3104, Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity
- ISO 3105, Glass capillary kinematic viscometers — Specifications and operating instructions
- ISO 20623, Petroleum and related products — Determination of the extreme-pressure and anti-wear properties of fluids — Four ball method (European conditions)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
percentage viscosity loss
RV
| ν0 | is the kinematic viscosity at 100° C of the fluid before shear, expressed in mm2·s−1; | |
| ν1 | is the kinematic viscosity at 100° C of the fluid after shear, expressed in mm2·s−1. |
Note 1 to entry: A small value indicates a high resistance to viscosity shear loss.
Note 2 to entry: The tapered roller bearing test is also referred to as the KRL (Kegelrollenlager) principle.
Bibliography
| [1] | DIN 51350-6, Testing of lubricants — Testing in the Shell four-ball tester — 6: Determination of shear stability of lubricating oils containing polymers |
| [2] | CEC-L-45-99, Viscosity Shear Stability of Transmission Lubricants |
| [3] | ISO 20844, Petroleum and related products — Determination of the shear stability of polymer-containing oils using a diesel injector nozzle |
| [4] | ISO 4259, Petroleum products — Determination and application of precision data in relation to methods of test |
| [5] | CETOP RP 112 H, Viscosity Shear Stability of Hydraulic Oils (Taper Roller Bearing Rig) |
| [6] | ISO 355, Rolling bearings — Tapered roller bearings — Boundary dimensions and series designations |