※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 26 は、映画撮影技術委員会 ISO/TC 36 によって作成されました。
この第 3 版は、技術改訂版である第 2 版 (ISO 26:1985) を廃止し、置き換えるものです。
この国際規格の附属書 A は情報提供のみを目的としています。
1 スコープ
この国際規格は、写真と磁気記録を備えた 16 mm 映画フィルムおよび 16 mm 無声映画フィルムの直接前面投影を目的とした、映写機における乳剤の配向、投影速度、投影画像領域の位置、画像と音声の関係を規定しています。
2 規範的参照
以下の規格には、本文中の参照を通じてこの国際規格の条項を構成する条項が含まれています。発行時点では、示されているエディションは有効です。すべての規格は改訂される可能性があり、この国際規格に基づく協定の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 490:— 1)、映画撮影 — 片端に沿って穴が開けられた 16 mm 映画フィルムに音声を記録するための磁気ストライプと磁気記録ヘッド ギャップ ( Type 1) — 位置と幅の寸法。
- ISO 4243:1979, 映画撮影 — 16 mm 映画リリース プリント上の画像領域と写真サウンド記録 — 位置と寸法。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 26 was prepared by Technical Committee ISO/TC 36, Cinematography.
This third edition cancels and replaces the second edition (ISO 26:1985), of which it constitutes a technical revision.
Annex A of this International Standard is for information only.
1 Scope
This International Standard specifies the emulsion orientation, the rate of projection, the position of the projected image area and the relationship between picture and sound in the projector, intended for direct front projection of 16 mm motion-picture films with photographic and magnetic sound records and 16 mm silent motion-picture films.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 490:— 1) , Cinematography — Magnetic stripes and magnetic recording head gaps for sound record on 16 mm motion-picture film perforated along one edge (Type 1) — Positions and width dimensions.
- ISO 4243:1979, Cinematography — Picture image area and photographic sound record on 16 mm motion-picture release prints — Positions and dimensions.