この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化機関 (ISO 加盟団体) の世界的な連合体です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。
国際規格 ISO 273 は ISO/TC2ファスナー技術委員会によって開発され、1977 年 12 月に加盟団体に配布されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | ハンガリー | ニュージーランド |
| ベルギー | インド | ノルウェー |
| ブルガリア | アイルランド | ルーマニア |
| カナダ | イタリア | スペイン |
| チェコスロバキア | 日本 | スウェーデン |
| デンマーク | 韓国民主党議員 | スイス |
| フィンランド | 韓国 | 七面鳥 |
| フランス | メキシコ | アメリカ合衆国 |
| ドイツ。フランス | オランダ | ユーゴスラビア |
以下の国の加盟団体は、技術的な理由からこの文書に不承認を表明しました。
南アフリカ共和国
イギリス
ソビエト連邦
この国際規格は、技術改訂版である ISO 勧告 R 273-1962 Pof を取り消し、置き換えるものです。
1 適用範囲と分野
この国際規格は、汎用用途のすきま穴の直径を規定しています。これらの値は、ISO ボルトおよびナット製品規格に関連した軸受面積の計算から得られます。
注 —特別な用途のためのクリアランスホールは、設計要件に基づいて選択する必要があります。
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 273 was developed by Technical Committee ISO/TC2, Fasteners, and was circulated to the member bodies in December 1977.
It has been approved by the member bodies of the following countries:
| Australia | Hungary | New Zealand |
| Belgium | India | Norway |
| Bulgaria | Ireland | Romania |
| Canada | Italy | Spain |
| Czechoslovakia | Japan | Sweden |
| Denmark | Korea, Dem. P. Rep, of | Switzerland |
| Finland | Korea, Rep. of | Turkey |
| France | Mexico | USA |
| Germany. F. R. | Netherlands | Yugoslavia |
The member bodies of the following countries expressed disapproval of the document on technical grounds:
South Africa, Rep. of
United Kingdom
USSR
This International Standard cancels and replaces ISO Recommendation R 273-1962 Pof which it constitutes a technical revision.
1 SCOPE AND FIELD OF APPLICATION
This International Standard specifies clearance hole diameters for general purpose applications. These values result from bearing area calculations in connection with ISO bolt and nut product standards.
NOTE — Clearance holes for special applications should be selected on the basis of design requirements.