この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 27407 は、技術委員会 ISO/TC 131, 流体動力システム、小委員会 SC 6, 汚染管理によって作成されました。
序章
油圧流体動力システムでは、閉回路内の圧力下の流体を介して動力が伝達および制御されます。独自の特性を示すフィルターを使用して、不溶性汚染物質を除去してシステムを保護します。これらの特性をフィルターにマークすると、ユーザーがフィルターを識別して比較するのに役立ち、アプリケーションに適したフィルターを選択しやすくなります。
1 スコープ
この国際規格は、関心のあるフィルター性能特性をユーザーに伝えるためにフィルターをマークする手段を指定します。このマーキングは、この国際規格で参照されている規格、または参照されている規格と調和した規格のいずれかで使用できます。この国際規格は、フィルター上の情報のマーキングのみに適用されます。顧客は、同じ情報を製品図面または製品パッケージの一部として指定するよう要求できます。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 1219-1, 流体動力システムおよびコンポーネント — 図記号および回路図 — 1: 従来の使用およびデータ処理アプリケーション用の図記号
- ISO 2941, 油圧流体動力 — フィルター要素 — 崩壊/破裂圧力定格の検証
- ISO 3968, 油圧流体動力 — フィルター — 差圧対流量特性の評価
- ISO 5598, 流体動力システムおよび製品 - 語彙
- ISO 16889, 油圧流体動力 — フィルター — フィルターエレメントのろ過性能を評価するためのマルチパス法
- ANSI/(NFPA)T3.10.17-199, 有限寿命油圧フィルター圧力/寿命定格 - スピンオン油圧フィルターのエンベロープを含む圧力の疲労寿命定格と破裂圧力定格を検証する方法
3 用語と定義
このドキュメントの目的のために、ISO 5598 に記載されている用語と定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 27407 was prepared by Technical Committee ISO/TC 131, Fluid power systems, Subcommittee SC 6, Contamination control.
Introduction
In hydraulic fluid power systems, power is transmitted and controlled through a fluid under pressure in a closed circuit. Filters demonstrating unique characteristics are used to protect the system by removing insoluble contaminants. Marking these characteristics on filters can help users identify and compare filters, making it easier to select one appropriate for an application.
1 Scope
This International Standard specifies a means of marking filters to communicate filter performance characteristics of interest to users. This marking can be used with either the standards referenced in this International Standard or with any standard that has been harmonized with any referenced standard. This International Standard applies to the marking of information only on the filter; the customer can request that the same information be specified on the product drawing or as part of the product packaging.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 1219-1, Fluid power systems and components — Graphic symbols and circuit diagrams — 1: Graphic symbols for conventional use and data-processing applications
- ISO 2941, Hydraulic fluid power — Filter elements — Verification of collapse/burst pressure rating
- ISO 3968, Hydraulic fluid power — Filters — Evaluation of differential pressure versus flow characteristics
- ISO 5598, Fluid power systems and products — Vocabulary
- ISO 16889, Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance of a filter element
- ANSI/(NFPA)T3.10.17-1995 (R2004), Finite life hydraulic filter pressure/life rating — Method for verifying the fatigue life rating and the burst pressure rating of the pressure containing envelope of a spin-on hydraulic filter
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5598 apply.