この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令第 1 Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
ISO は、この文書の実装に特許の使用が含まれる可能性があることに注意を促しています。 ISO は、請求された特許権に関する証拠、有効性、または適用可能性に関していかなる立場もとりません。この文書の発行日の時点で、ISO はこの文書の実装に必要となる可能性のある特許の通知を受け取っていません。ただし、実装者は、これが www.iso.org/patents で入手可能な特許データベースから取得できる最新の情報を表していない可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www.iso.org/iso/foreword.html を 参照してください。
この文書は、ISO と CEN 間の技術協力に関する協定 (ウィーン協定) に従って、欧州標準化委員会 (CEN) 技術委員会 CEN/TC 262「金属およびその他の無機コーティング (金属および合金の防食および腐食試験を含む)」と協力して、ISO/TC 107 技術委員会「金属およびその他の無機コーティング」によって作成されました。
この第 3 版は、技術的に改訂された第 2 版 (ISO 28721-2:2015) を廃止し、置き換えるものです。
主な変更点は以下のとおりです。
- 基準参照が更新されました。
- 用語と定義が追加されました。
- 亀裂形成温度の決定が更新されました。
ISO 28721 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
導入
エナメル製品の性能は、ガラス質エナメルの化学組成と特定のエナメル加工プロセスの両方によって影響を受ける可能性があります。エナメルの一般的な名称以外に測定可能な属性を特定するために、製造業者は標準化されたテストを実施します。エナメルは、その結果得られる耐腐食性と熱衝撃性の観点から分類されます。
この文書で指定されている品質要件は、現在の技術水準に基づいて化学エナメルが満たすことが期待される最小要件を表しています。
警告この文書では、適切な安全対策が講じられない場合、健康に害を及ぼす可能性のある物質または手順、またはその両方の使用を呼びかけています。この文書は、その使用に関連する健康被害、安全性、環境上の問題については触れていません。適切な健康、安全、および環境慣行を確立し、使用前に規制上の制限の適用可能性を判断することは、この文書のユーザーの責任です。
1 スコープ
この文書は、注文目的のために、化学的攻撃および熱衝撃に対する化学エナメルの耐性の要件とその指定を指定します。
主に化学プラントのプロセス装置で使用されるグラスライニングされた装置、配管、その他の部品に使用される、低合金炭素鋼基材上に適用されるエナメルに適用されます。
注エナメルの品質を評価する主な基準は、化学的攻撃や熱衝撃に対する耐性、およびカバーコートエナメルの構造です。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 13807, ガラス質および磁器エナメル - 化学工業用エナメルの熱衝撃試験における亀裂形成温度の決定
- ISO 19496-1, ガラス質およびほうろう - 用語 - Part 1: 用語と定義
- ISO 28706-2, ガラス質および磁器エナメル — 化学腐食に対する耐性の測定 — Part 2: 沸騰酸、沸騰中性液体、アルカリ性液体および/またはそれらの蒸気による化学腐食に対する耐性の測定
- ISO 28706-4, ガラス質およびホーロー - 化学的腐食に対する耐性の測定 - Part 4: 円筒形容器を使用したアルカリ性液体による化学的腐食に対する耐性の測定
3 用語と定義
この文書の目的には、ISO 19496-1 に示されている用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
参考文献
| 1 | ISO 28721-3, ガラス質および磁器エナメル — プロセスプラント用のガラスライニング装置 — Part 3: 耐熱衝撃性 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s) which may be required to implement this document. However, implementers are cautioned that this may not represent the latest information, which may be obtained from the patent database available at www.iso.org/patents . ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 107, Metallic and other inorganic coatings, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 262, Metallic and other inorganic coatings, including for corrosion protection and corrosion testing of metals and alloys, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 28721-2:2015), which has been technically revised.
The main changes are as follows:
- The normative references have been updated.
- Terms and definitions have been added.
- The crack formation temperature determination has been updated.
A list of all parts in the ISO 28721 series can be found on the ISO website.
Introduction
The performance of an enamelled article can be influenced by both the chemical composition of a vitreous enamel and the specific enamelling process. In order to ascribe measurable attributes to enamel besides its general designation, the manufacturer conducts standardized tests. The enamel is categorized in terms of the resulting resistance to corrosion and thermal shock.
The quality requirements specified in this document represent the minimum requirements a chemical enamel is expected to meet based on the current state of the art.
WARNING This document calls for the use of either substances or procedures, or both, that can be injurious to health if adequate safety measures are not taken. This document does not address any health hazards, safety or environmental matters associated with its use. It is the responsibility of the user of this document to establish appropriate health, safety and environment practices and determine the applicability of regulatory limitations prior to use.
1 Scope
This document specifies requirements for the resistance of chemical enamels to chemical attack and thermal shock, as well as their designation, for ordering purposes.
It is applicable to enamels used in glass-lined apparatus, piping and other components, primarily used in process equipment in chemical plants, which are applied on to low-alloy carbon steels substrates.
NOTE The main criteria for assessing enamel quality are its resistance to chemical attack and thermal shock, and the structure of the cover coat enamel.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 13807, Vitreous and porcelain enamels — Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry
- ISO 19496-1, Vitreous and porcelain enamels — Terminology — Part 1: Terms and definitions
- ISO 28706-2, Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours
- ISO 28706-4, Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 19496-1 apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
Bibliography
| 1 | ISO 28721-3, Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 3: Thermal shock resistance |