※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令第 1 Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part の編集規則に従って起草されました ( www.iso.org/directives を参照)
ISO は、この文書の実装には特許の使用が含まれる可能性があることに注意を促します。 ISO は、請求された特許権に関する証拠、有効性、または適用可能性に関していかなる立場もとりません。この文書の発行日の時点で、ISO はこの文書の実装に必要となる可能性のある特許の通知を受け取っていません。ただし、実装者は、これが www.iso.org/patents で入手可能な特許データベースから取得できる最新の情報を表していない可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html
この文書は、欧州標準化委員会 (CEN) 技術委員会 CEN/TC 139「塗料およびワニス」と協力して、ISO/TC 35 技術委員会「塗料およびワニス」小委員会 SC 9「塗料およびワニスの一般試験方法」によって作成されました。 ISO と CEN 間の技術協力に関する協定 (ウィーン協定) に従っています。
この第 2 版は、技術的に改訂された第 1 版 (ISO 2884-2:2003) を廃止し、置き換えます。
主な変更点は以下のとおりです。
- 用語と記号は ISO 3219-1 に準拠しています。
- この文書では粘度の相対値について言及しているという記述が追加されました。
- テストレポートを含むテスト手順の説明が更新されました。
- 基準参照が更新されました。
ISO 2884 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
1 スコープ
この文書は、塗料、ワニス、関連製品、およびバインダーの粘度を決定するための一般的な手順を指定します。この方法は主に、製品の相対粘度を決定し、製造プロセス中の薄化中にこれを監視するために使用されます。これは、指定された速度でディスクまたはボール スピンドルを使用した粘度の相対測定について説明します。
この文書で指定されている方法は、挙動がニュートン的であるかどうかに関係なく、すべての塗料とワニスに適しています。粒子が分散した材料にも適用できます。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 1513, 塗料およびワニス — 試験サンプルの検査と準備
- ISO 3219-1, レオロジー — Part 1: 回転および振動レオメトリーの語彙と記号
- ISO 15528, 塗料、ワニスおよび塗料およびワニスの原料 — サンプリング
3 用語と定義
この文書の目的には、ISO 3219-1 に記載されている用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s) which may be required to implement this document. However, implementers are cautioned that this may not represent the latest information, which may be obtained from the patent database available at www.iso.org/patents . ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 9, General test methods for paints and varnishes, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 139, Paints and varnishes, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 2884-2:2003), which has been technically revised.
The main changes are as follows:
- terminology and symbols have been adapted to ISO 3219-1;
- a statement has been added that this document refers to a relative value for viscosity;
- description of the test procedure including the test report has been updated;
- the normative references have been updated.
A list of all parts in the ISO 2884 series can be found on the ISO website.
1 Scope
This document specifies a general procedure for determining the viscosity of paints, varnishes and related products, as well as binders. The method is primarily used to determine the relative viscosity of a product and to monitor this while thinning during a manufacturing process. It describes a relative measurement of viscosity using disc or ball spindles at specified speeds.
The method specified in this document is suitable for all paints and varnishes whether they are Newtonian in behaviour or not. It can also be applied to materials containing dispersions of particles.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 1513, Paints and varnishes — Examination and preparation of test samples
- ISO 3219-1, Rheology — Part 1: Vocabulary and symbols for rotational and oscillatory rheometry
- ISO 15528, Paints, varnishes and raw materials for paints and varnishes — Sampling
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 3219-1 apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses: