※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って起草されています。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に回覧されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 2959 は、技術委員会 ISO/TC 38, 繊維、小委員会 SC 20, 生地の説明によって作成されました。
この第 2 版は、第 1 版 (ISO 2959:1973) を取り消して置き換えるものであり、3.5 での規範的参照 (ISO 3572) の追加に対処するためのマイナーな改訂を構成します。マイナーな編集上の変更も行われました。
1 スコープ
この国際規格は、織物の指定を目的として、製造および加工のさまざまな段階で織物とその構成要素に多くの特徴的なパラメータを与えます。パラメータのリストが排他的であることを意図しておらず、必要に応じて追加情報を提供できます。
織物床材を除くすべての織物に適用できます。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 2959 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 20, Fabric descriptions.
This second edition cancels and replaces the first edition (ISO 2959:1973), of which it constitutes a minor revision to address the addition of a normative reference (ISO 3572) in 3.5. Minor editorial changes have also been made.
1 Scope
This International Standard gives a number of characteristic parameters for woven fabrics and their constituents at various stages of manufacture and processing for the purpose of fabric designation. It is not intended that the list of parameters is exclusive and additional information can be given as required.
It is applicable to all woven fabrics except textile floor coverings.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 1139, Textiles — Designation of yarns
- ISO 1833 (all parts), Textiles — Quantitative chemical analysis
- ISO 2076, Textiles — Man-made fibres — Generic names
- ISO 3572, Textiles — Weaves — Definitions of general terms and basic weaves