この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 29765 は、技術委員会 ISO/TC 163「建築環境における熱性能とエネルギー使用」 、小委員会 SC 1「試験および測定方法」によって作成されました。
導入
この国際規格は、技術委員会 CEN/TC 88「断熱材および製品」によって作成されたオリジナルの EN 1607:1996 および EN 1607:1996/AC:1997 で構成されており、調整に関して ISO/TC 163/SC 1 によって修正されています。熱帯諸国での試験条件。
この国際規格は、ISO で採用されている既存の欧州規格に基づいた試験方法を指定する一連の文書の 1 つです。この標準の「パッケージ」には、次の相互に関連する文書のグループが含まれています。
| 国際規格 | それぞれのEN規格 |
|---|---|
| ISO 29465, 建築用途向け断熱製品 — 長さと幅の決定 | EN 822 |
| ISO 29466, 建築用途向け断熱製品 - 厚さの決定 | EN 823 |
| ISO 29467, 建築用途向け断熱製品 - 直角度の測定 | EN 824 |
| ISO 29468, 建築用途向け断熱製品 - 平面度の測定 | EN825 |
| ISO 29469, 建築用途向け断熱製品 - 圧縮挙動の測定 | EN 826 |
| ISO 29470, 建築用途向け断熱製品 - 見掛け密度の測定 | EN 1602 |
| ISO 29471, 建築用途向け断熱製品 — 一定の通常の実験室条件 (23 °C/相対湿度 50%) での寸法安定性の測定 | EN 1603 |
| ISO 29472, 建築用途向け断熱製品 — 指定された温度および湿度条件下での寸法安定性の測定 | EN 1604 |
| ISO 29764, 建築用途向け断熱製品 — 指定された圧縮荷重および温度条件下での変形の測定 | EN 1605 |
| ISO 29765, 建築用途向け断熱製品 - 面に垂直な引張強度の測定 | EN 1607 |
| ISO 29766, 建築用途向け断熱製品 — 面に平行な引張強度の測定 | EN 1608 |
| ISO 29767, 建築用途向け断熱製品 — 部分浸漬による短期吸水量の測定 | EN 1609 |
| ISO 29768, 建築用途向け断熱製品 — 試験片の長さ寸法の決定 | EN 12085 |
| ISO 29769, 建築用途向け断熱製品 — 点荷重時の挙動の決定 | EN 12430 |
| ISO 29770, 建築用途の断熱製品 — 浮床断熱製品の厚さの決定 | EN 12431 |
| ISO 29771, 建築用途の断熱材 - 有機含有量の測定 | EN 13820 |
| ISO 29803, 建築用途向け断熱製品 — 外部断熱複合システム (ETICS) の耐衝撃性の測定 | EN 13497 |
| ISO 29804, 建築用途向け断熱製品 - 断熱材に対する接着剤およびベースコートの引張接着強度の測定 | EN 13494 |
| ISO 29805, 建築用途向け断熱製品 — ガラス繊維メッシュの機械的特性の測定 | EN 13496 |
1 スコープ
この国際規格は、製品の面に垂直な引張強度を測定するための装置と手順を規定しています。この国際規格は断熱製品に適用されます。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 29768, 建築用途向け断熱製品 — 試験片の長さ寸法の決定
- ISO 5725-1:1994, 測定方法と結果の精度 (真性と精度) — Part 1: 一般原則と定義
- ISO 5725-2:1994, 測定方法と結果の精度 (真性と精度) - Part 2: 標準測定方法の再現性と再現性を決定するための基本方法
3 用語と定義
この文書の目的上、次の用語と定義が適用されます。
3.1
面に垂直な引張強さ
σmtmt
引っ張り操作中に製品面に垂直に記録された最大引張力を試験片の断面積で割ったもの
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 29765 was prepared by Technical Committee ISO/TC 163, Thermal performance and energy use in the built environment, Subcommittee SC 1, Test and measurement methods.
Introduction
This International Standard comprises the original EN 1607:1996 and EN 1607:1996/AC:1997 prepared by Technical Committee CEN/TC 88, Thermal insulating materials and products, which have been amended by ISO/TC 163/SC 1 with reference to conditioning and testing conditions in tropical countries.
This International Standard is one of a series of documents specifying test methods, based on existing European Standards, that are being adopted by ISO. This “package” of standards includes the following group of interrelated documents.
| International Standard | Respective EN standard |
|---|---|
| ISO 29465, Thermal insulating products for building applications — Determination of length and width | EN 822 |
| ISO 29466, Thermal insulating products for building applications — Determination of thickness | EN 823 |
| ISO 29467, Thermal insulating products for building applications — Determination of squareness | EN 824 |
| ISO 29468, Thermal insulating products for building applications — Determination of flatness | EN 825 |
| ISO 29469, Thermal insulating products for building applications — Determination of compression behaviour | EN 826 |
| ISO 29470, Thermal insulating products for building applications — Determination of the apparent density | EN 1602 |
| ISO 29471, Thermal insulating products for building applications — Determination of dimensional stability under constant normal laboratory conditions (23 °C/50 % relative humidity) | EN 1603 |
| ISO 29472, Thermal insulating products for building applications — Determination of dimensional stability under specified temperature and humidity conditions | EN 1604 |
| ISO 29764, Thermal insulating products for building applications — Determination of deformation under specified compressive load and temperature conditions | EN 1605 |
| ISO 29765, Thermal insulating products for building applications — Determination of tensile strength perpendicular to faces | EN 1607 |
| ISO 29766, Thermal insulating products for building applications — Determination of tensile strength parallel to faces | EN 1608 |
| ISO 29767, Thermal insulating products for building applications — Determination of short-term water absorption by partial immersion | EN 1609 |
| ISO 29768, Thermal insulating products for building applications — Determination of linear dimensions of test specimens | EN 12085 |
| ISO 29769, Thermal insulating products for building applications — Determination of behaviour under point load | EN 12430 |
| ISO 29770, Thermal insulating products for building applications — Determination of thickness for floating-floor insulating products | EN 12431 |
| ISO 29771, Thermal insulating materials for building applications — Determination of organic content | EN 13820 |
| ISO 29803, Thermal insulation products for building applications — Determination of the resistance to impact of external thermal insulation composite systems (ETICS) | EN 13497 |
| ISO 29804, Thermal insulation products for building applications — Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material | EN 13494 |
| ISO 29805, Thermal insulation products for building applications — Determination of the mechanical properties of glass fibre meshes | EN 13496 |
1 Scope
This International Standard specifies the equipment and procedures for determining the tensile strength of a product perpendicular to its faces. This International Standard is applicable to thermal insulating products.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 29768, Thermal insulating products for building applications — Determination of linear dimensions of test specimens
- ISO 5725-1:1994, Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
- ISO 5725-2:1994, Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
3 Terms and definitions
For the purposes of this document, the following term and definition apply.
3.1
tensile strength perpendicular to faces
σmt
maximum recorded tensile force perpendicular to the product faces during the pulling operation, divided by the cross-sectional area of the test specimen