ISO 3063:2004 イランイランの油(Cananga odorata(Lam。)Hook。f。etThomson forma genuina) | ページ 2

※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。

序文

ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。

国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。

技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。

この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。

ISO 3063 は、ISO/TC 54, エッセンシャル オイル技術委員会によって作成されました。

この第 2 版は、技術的に改訂された第 1 版 (ISO 3063:1983) を廃止し、置き換えます。

1 スコープ

この国際規格は、イランイラン油 [ Canangaodorata (Lam.) Hook] の特定の特性を指定しています。 f. et Thomson forma genuina ] は、品質の評価を容易にするために、マダガスカル、マヨット、コモア島産のものです。

2 規範的参照

この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。

  • ISO/TR 210, エッセンシャルオイル — 包装、調整、および保管に関する一般規則
  • ISO/TR 211, エッセンシャルオイル — 容器のラベルおよびマーキングに関する一般規則
  • ISO 212, エッセンシャル オイル — サンプリング
  • ISO 279, エッセンシャルオイル — 20 °C での相対密度の測定 — 参照方法
  • ISO 280, エッセンシャルオイル — 屈折率の測定
  • ISO 592, エッセンシャルオイル - 旋光度の測定
  • ISO 709, エッセンシャルオイル - エステル価の測定
  • ISO 1242, エッセンシャルオイル - 酸価の測定
  • ISO 11024-1, エッセンシャルオイル — クロマトグラフィープロファイルに関する一般的なガイダンス — Part 1: 規格で提示するためのクロマトグラフィープロファイルの準備
  • ISO 11024-2, エッセンシャル オイル — クロマトグラフィー プロファイルに関する一般的なガイダンス — Part 2: エッセンシャル オイルのサンプルのクロマトグラフィー プロファイルの利用

3 用語と定義

この文書の目的上、次の用語と定義が適用されます。

3.1

イランイランのオイル

Canangaodorata (Lam.) Hook の新鮮な花を水蒸気蒸留して得られるエッセンシャル オイル。 f. et Thomson forma genuina 、主にマダガスカル、マヨット、コモア諸島に生育するバンレイシ科の植物

注記 1:この揮発性生成物は、通常、オイル全体として収集されるのではなく、蒸留の過程で 5 つの連続する留分として収集されます。それぞれ「エクストラ スーパー」、「エクストラ」、「ファースト」、「セカンド」、「サード」として知られるこれら 5 つの留分は、通常取引されているオイルです。

注記 2: CAS 番号については、ISO/TR 21092 を参照。

参考文献

1ISO/TR 11018:1997, エッセンシャルオイル — 引火点の測定に関する一般的なガイダンス
2ISO/TR 21092:2004, エッセンシャルオイル - 特性評価

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 3063 was prepared by Technical Committee ISO/TC 54, Essential oils.

This second edition cancels and replaces the first edition (ISO 3063:1983), which has been technically revised.

1 Scope

This International Standard specifies certain characteristics of the oil of ylang-ylang [Cananga odorata (Lam.) Hook. f. et Thomson forma genuina] from Madagascar, Mayotte and Comores, in order to facilitate assessment of its quality.

2 Normative references

The following referenced documents are indispensa­ble for the application of this document. For dated references, only the edition cited applies. For un­dated references, the latest edition of the referenced document (including any amendments) applies.

  • ISO/TR 210, Essential oils — General rules for pack­aging, conditioning and storage
  • ISO/TR 211, Essential oils — General rules for label­ling and marking of containers
  • ISO 212, Essential oils — Sampling
  • ISO 279, Essential oils — Determination of relative density at 20 °C — Reference method
  • ISO 280, Essential oils — Determination of refrac­tive index
  • ISO 592, Essential oils — Determination of optical rotation
  • ISO 709, Essential oils — Determination of ester value
  • ISO 1242, Essential oils — Determination of acid value
  • ISO 11024-1, Essential oils — General guidance on chromatographic profiles — Part 1: Preparation of chromatographic profiles for presentation in stan­dards
  • ISO 11024-2, Essential oils — General guidance on chromatographic profiles — Part 2: Utilization of chro­matographic profiles of samples of essential oils

3 Terms and definitions

For the purposes of this document, the following terms and definitions apply.

3.1

oil of ylang-ylang

essential oil obtained by steam distillation of the fresh flowers of Cananga odorata (Lam.) Hook. f. et Thomson forma genuina, of the Annonaceae family, growing mainly in Madagascar, Mayotte and Co­mores

Note 1 to entry: This volatile product is not generally collected as a whole oil, but in five successive fractions during the course of distillation. These five fractions, known respec­tively as “Extra super”, “Extra”, “First”, “Second” and “Third”, are the oils usually found in the trade.

Note 2 to entry: For information on the CAS number, see ISO/TR 21092.

Bibliography

1ISO/TR 11018:1997, Essential oils — General guidance on the determination of flashpoint
2ISO/TR 21092:2004, Essential oils — Characterization