この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、次の情報を参照してください。次の URL: www.iso.org/iso/foreword.html
この文書は、ISO/TC 4 技術委員会「転がり軸受」、SC 5 分科会「針状ころ軸受、円筒ころ軸受、自動調心ころ軸受」によって作成されました。
この第 3 版は、技術的に改訂された第 2 版 (ISO 3096:1996) を廃止し、置き換えるものです。また、技術的正誤表 ISO 3096:1996/Cor も組み込まれています。 1:199前版との主な変更点は以下の通りです。
- 図および表中の用語、定義、記号、および寸法公差表示は、GPS (Geometrical Product Specific) システムの規則に従って改訂されています。
- 表 3 では、すべての寸法にD w = 4.5 mm および 5.5 mm, L w = 31.8 mm および 37.8 mm が追加されています。
- 付録 A が追加されました。
導入
この文書は、ISO 14638 のマトリックス モデルで示されている幾何製品仕様 (GPS) システムで定義されている機械要素の幾何学的標準です。
特に明記されていない限り、ISO 8015 に規定されている ISO GPS の基本規則がこの文書に適用され、ISO 14253-1 に規定されているデフォルトの決定規則がこの文書に従って作成された仕様に適用されます。
機能要件、測定技術、測定の不確実性の間の関係は常に考慮されるように意図されています。測定の不確かさについては、ISO 14253-2 が考慮されることが意図されています。
1 スコープ
この文書は、転動体として使用される完成鋼針状ころの寸法および幾何学的特性、公称境界寸法および公差値を規定します。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 1101, 幾何製品仕様 (GPS) — 幾何公差 — 形状、方向、位置、および振れの公差
- ISO 5593, 転がり軸受 — 語彙
- ISO 14405-1, 幾何製品仕様 (GPS) — 寸法公差 — Part 1: 直線サイズ
3 用語と定義
この文書の目的上、ISO 1101, ISO 5593, ISO 14405-1 および以下で与えられる用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
ニードルローラー直径ゲージ
直径偏差範囲はΔDwmpの上限と下限によって制限されます
注記 1:ゲージは、マイクロメートル単位で表される上限および下限偏差によって指定されます (例: –2 –4)
注記 2: ΔDwmp については、表 1 を参照してください。
3.2
ニードルローラー径ゲージロット
同じ針状ころのグレードと呼び寸法で、すべて同じ針状ころ直径ゲージ内で中程度のサイズの針状ころ直径 Dwmp を持つ針状ころの数量
注記 1:針状ころのグレードおよび公称寸法の針状ころは、表 3 に示す直径ゲージのロットで供給されます。
注記 2: Dwmp については、表 1 を参照してください。
3.3
針状ころグレード
G
ニードルローラーの寸法、形状、表面粗さ、選別公差の特定の組み合わせ
注記 1:針状ころのグレードは、文字 G と数字 (例: G2) で指定されます。
参考文献
| 1 | ISO 286-2, 幾何製品仕様 (GPS) — 直線サイズの公差に関する ISO コード システム — Part 2: 穴とシャフトの標準公差クラスと限界偏差の表 |
| 2 | ISO 5459, 幾何製品仕様 (GPS) — 幾何公差 — データムおよびデータム システム |
| 3 | ISO 8015, 幾何製品仕様 (GPS) — 基礎 — 概念、原則および規則 |
| 4 | ISO 14253-1, 幾何学的製品仕様書 (GPS) — ワークおよび測定機器の測定による検査 — Part 1 部: 仕様への適合または不適合を検証するための決定ルール |
| 5 | ISO 14253-2, 幾何学的製品仕様書 (GPS) — ワークピースおよび測定装置の測定による検査 — Part 2: GPS 測定、測定装置の校正、および製品検証における不確かさの推定に関するガイダンス |
| 6 | ISO 14638, 幾何製品仕様 (GPS) — マトリックス モデル |
| 7 | ISO 15241, 転がり軸受 — 物理量の記号 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 4, Rolling bearings, Subcommittee SC 5, Needle, cylindrical and spherical roller bearings.
This third edition cancels and replaces the second edition (ISO 3096:1996), which has been technically revised. It also incorporates the Technical Corrigendum ISO 3096:1996/Cor. 1:1999. The main changes compared to the previous edition are as follows:
- Terms, definitions, symbols and dimensional tolerance indications in figures and tables have been revised according to rules of geometrical product specification (GPS) system.
- In Table 3, all dimensions have been added with Dw = 4,5 mm and 5,5 mm and with Lw = 31,8 mm and 37,8 mm.
- Annex A has been added.
Introduction
This document is a machine element geometry standard as defined in the geometrical product specification (GPS) system as presented in matrix model of ISO 14638.
The fundamental rules of ISO GPS given in ISO 8015 apply to this document and the default decision rules given in ISO 14253-1 apply to specifications made in accordance with this document, unless otherwise indicated.
The connection between functional requirements, measuring technique and measuring uncertainty is always intended to be considered. For measurement uncertainty, it is intended that ISO 14253-2 be considered.
1 Scope
This document specifies dimensional and geometrical characteristics, nominal boundary dimensions and tolerance values for finished steel needle rollers used as rolling elements.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 1101, Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
- ISO 5593, Rolling bearings — Vocabulary
- ISO 14405-1, Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 1101, ISO 5593, ISO 14405-1 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
3.1
needle roller diameter gauge
diameter deviation range limited by the upper and lower limits of ∆Dwmp
Note 1 to entry: A gauge is designated by the upper and lower limit deviation expressed in micrometres, for example –2 –4.
Note 2 to entry: For ∆Dwmp, see Table 1.
3.2
needle roller diameter gauge lot
quantity of needle rollers, of the same needle roller grade and nominal dimensions, all having a mid-range size of needle roller diameter Dwmp within the same needle roller diameter gauge
Note 1 to entry: Needle rollers of any needle roller grade and nominal dimensions are supplied in diameter gauge lots as given in Table 3.
Note 2 to entry: For Dwmp, see Table 1.
3.3
needle roller grade
G
specific combination of dimensional, form, surface roughness and sorting tolerances for needle rollers
Note 1 to entry: A needle roller grade is designated by letter G and a number, e.g. G2.
Bibliography
| 1 | ISO 286-2, Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| 2 | ISO 5459, Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems |
| 3 | ISO 8015, Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules |
| 4 | ISO 14253-1, Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
| 5 | ISO 14253-2, Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
| 6 | ISO 14638, Geometrical product specifications (GPS) — Matrix model |
| 7 | ISO 15241, Rolling bearings — Symbols for physical quantities |