※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 310 は、技術委員会 ISO/TC 65, マンガンおよびクロム鉱石によって作成されました。
この第 3 版は、技術改訂を構成する第 2 版 (ISO 310:1981) を取り消して置き換えるものです。
この国際規格の附属書 A は情報提供のみを目的としています。
1 スコープ
この国際規格は、マンガン鉱石および精鉱の吸湿性水分含有量を測定するための重量法を規定しています。この方法は、吸湿性含水率が 0.1% ( m/ m ) から 10% ( m/ m ) の製品に適用できます。
吸湿性水分含有量の測定は、同じ分析サンプルの他の成分の測定と同時に実行されることを意図しているため、完全に乾燥した鉱石に基づいて他の成分の含有量を計算できます。
この国際規格は、ISO 4297 と併せて読む必要があります。
2 参考文献
次の規格には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。発行の時点で、示されている版は有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 4296-1:1984, マンガン鉱 — サンプリング — 1: インクリメンタル サンプリング。
- ISO 4296-2:1983, マンガン鉱 — サンプリング — 2: サンプルの準備。
- ISO 4297:1978, マンガン鉱石および精鉱 — 化学分析の方法 — 一般的な指示。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 310 was prepared by Technical Committee ISO/TC 65, Manganese and chromium ores.
This third edition cancels and replaces the second edition (ISO 310:1981), of which it constitutes a technical revision.
Annex A of this International Standard is for information only.
1 Scope
This International Standard specifies a gravimetric method for the determination of the hygroscopic moisture content of manganese ores and concentrates. The method is applicable to products having hygroscopic moisture contents from 0,1 % (m/m) and 10 % (m/m).
The determination of the hygroscopic moisture content is intended to be carried out simultaneously with the determination of other constituents of the same analytical sample, so that the contents of the other constituents can be calculated on the basis of the absolutely dry ore.
This International Standard should be read in conjunction with ISO 4297.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 4296-1:1984, Manganese ores — Sampling — 1: Increment sampling.
- ISO 4296-2:1983, Manganese ores — Sampling — 2: Preparation of samples.
- ISO 4297:1978, Manganese ores and concentrates — Methods of chemical analysis — General instructions.