※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化機関 (ISO 会員団体) の世界的な連合体です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。
国際規格 ISO 3137 は ISO/TC 47化学技術委員会によって作成され、1973 年 6 月に加盟団体に配布されました。
以下の国の加盟団体によって承認されています。
| オーストリア | インド | 南アフリカ共和国 |
| ベルギー | イスラエル | スペイン |
| ブルガリア | イタリア | スイス |
| チェコスロバキア | オランダ | タイ |
| エジプト、アラブ共和国 | ニュージーランド | 七面鳥 |
| フランス | ポーランド | イギリス |
| ドイツ | ポルトガル | ソビエト連邦 |
| ハンガリー | ルーマニア |
この国際規格は、国際純粋応用化学連合 (IUPAC) によっても承認されています。
この文書に不承認を表明した加盟団体はなかった。
警告 – 無水フッ化水素は 19.5 ℃で沸騰する腐食性の高い液体です。ガラスを侵し、水との親和性が高く、その蒸気は刺激性があり有毒です。皮膚や目への作用は強い腐食性があり、重度の痛みを伴う火傷を引き起こしますが、これはすぐには明らかではなく、治療に対する反応も遅いです。
サンプルは換気の良いドラフトチャンバー内でのみ取り扱ってください。材料を取り扱うときは、個人を適切に保護するために適切なサイズのゴム手袋、ブーツ、ガウンを着用し、頭と顔全体を保護する必要があります。
接触した場合、または接触の疑いがある場合は、水を流して直ちに医師の診察を受けてください。詳細については、メーカーの資料を参照してください。
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO Member Bodies). The work of developing International Standards is carried out through ISO Technical Committees. Every Member Body interested in a subject for which a Technical Committee has been set up has the right to be represented on that Committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated to the Member Bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 3137 was drawn up by Technical Committee ISO/TC 47, Chemistry, and circulated to the Member Bodies in June 1973.
It has been approved by the Member Bodies of the following countries:
| Austria | India | South Africa, Rep. of |
| Belgium | Israel | Spain |
| Bulgaria | Italy | Switzerland |
| Czechoslovakia | Netherlands | Thailand |
| Egypt, Arab Rep. of | New Zealand | Turkey |
| France | Poland | United Kingdom |
| Germany | Portugal | U.S.S.R. |
| Hungary | Romania |
This International Standard has also been approved by the International Union of Pure and Applied Chemistry (IUPAC).
No Member Body expressed disapproval of the document.
WARNING — Anhydrous hydrogen fluoride is a highly corrosive liquid which boils at 19,5 C. It attacks glass, has a great affinity for water and its vapour is irritant and toxic. Its action on the skin and eyes is strongly corrosive, producing severe and painful burns which may not be immediately evident and which respond slowly to treatment.
Samples should be handled only inside a well-ventilated fume cupboard. Rubber gloves, boots and gown of a suitable size to give adequate protection to the individual, and full head and face protection must be worn when handling the material.
In the event of contact or suspected contact, flood with water and seek immediate medical attention. The manufacturers' literature should be consulted for further information.