※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
ISO は、この文書の実装に特許の使用が含まれる可能性があることに注意を促しています。 ISO は、請求された特許権に関する証拠、有効性、または適用可能性に関していかなる立場もとりません。この文書の発行日の時点で、ISO はこの文書の実装に必要となる可能性のある特許の通知を受け取っていません。ただし、実装者は、これが www.iso.org/patents で入手可能な特許データベースから取得できる最新情報を表していない可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html
この文書は、ISO との間の技術協力に関する協定に従って、欧州標準化委員会 (CEN) 技術委員会 CEN/TC 298顔料および増量剤と協力して、ISO/TC 256 技術委員会「顔料、染料および増量剤」によって作成されました。 CEN (ウィーン協定)
この第 2 版は、技術的に改訂された第 1 版 (ISO 3262-11:2000) を廃止し、置き換えます。
主な変更点は以下のとおりです。
- タイトルの最初の部分は「Extenders」に変更されました。
- 石英とアスベストの測定が表 1 の必須要件に追加されました。
- 表 2 の粒度分布の試験方法は ISO 8130-13 に変更されました。
- 基準参照が更新されました。
ISO 3262 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
1 スコープ
この文書は、炭酸塩と結合した層状の天然タルクから作られた製品の要件と対応する試験方法を指定します。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 787-2, 顔料および体質顔料の一般試験方法 - Part 2: 105 °C での物質の揮発性の測定
- ISO 787-3, 顔料および増量剤の一般試験方法 - Part 3: 水溶性物質の測定 - 熱抽出法
- ISO 787-7, 顔料および増量剤の一般試験方法 — Part 7: ふるい上の残留物の測定 — 水法 — 手動手順
- ISO 787-9, 顔料および増量剤の一般試験方法 - Part 9: 水性懸濁液の pH 値の測定
- ISO 787-14, 顔料および増量剤の一般試験方法 - Part 14: 水性抽出物の抵抗率の測定
- ISO 787-18, 顔料および増量剤の一般試験方法 — Part 18: ふるい上の残留物の測定 — 機械的フラッシング手順
- ISO 3262-1, エクステンダー — 仕様とテスト方法 — Part 1: 概要と一般的なテスト方法
- ISO 3262-2:2023, エクステンダー — 仕様と試験方法 — Part 2: バライト (天然硫酸バリウム)
- ISO 8130-13, コーティングパウダー - Part 13: レーザー回折による粒子サイズ分析
- ISO 14966, 周囲空気 — 無機繊維粒子の数値濃度の測定 — 走査型電子顕微鏡法
- ISO 18451-1, 顔料、染料および増量剤 — 用語 — Part 1: 一般用語
3 用語と定義
この文書の目的としては、ISO 18451-1 および以下に示されている用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
3.1
炭酸塩を含む層状の天然タルク
水和ケイ酸マグネシウムの自然会合 3MgO・4SiO 2・H 2 O | Mg 3 [(OH) 2/Si 4 O 10 ]および炭酸塩、例えばドロマイトCaMg(CO 3 ) 2およびマグネサイトMgCO 3
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s) which may be required to implement this document. However, implementers are cautioned that this may not represent the latest information, which may be obtained from the patent database available at www.iso.org/patents . ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 256, Pigments, dyestuffs and extenders in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 298, Pigments and extenders, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 3262-11:2000), which has been technically revised.
The main changes are as follows:
- the first part of the title has been changed to"Extenders";
- the determination of quartz and asbestos have been added to the essential requirements in Table 1;
- the test method for particle size distribution in Table 2 has been changed to ISO 8130-13;
- the normative references have been updated.
A list of all parts in the ISO 3262 series can be found on the ISO website.
1 Scope
This document specifies requirements and corresponding methods of test for products made from naturally occurring talc in lamellar form associated with carbonates.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 787-2, General methods of test for pigments and extenders — Part 2: Determination of matter volatile at 105 °C
- ISO 787-3, General methods of test for pigments and extenders — Part 3: Determination of matter soluble in water — Hot extraction method
- ISO 787-7, General methods of test for pigments and extenders — Part 7: Determination of residue on sieve — Water method — Manual procedure
- ISO 787-9, General methods of test for pigments and extenders — Part 9: Determination of pH value of an aqueous suspension
- ISO 787-14, General methods of test for pigments and extenders — Part 14: Determination of resistivity of aqueous extract
- ISO 787-18, General methods of test for pigments and extenders — Part 18: Determination of residue on sieve — Mechanical flushing procedure
- ISO 3262-1, Extenders — Specifications and methods of test — Part 1: Introduction and general test methods
- ISO 3262-2:2023, Extenders — Specifications and methods of test — Part 2: Baryte (natural barium sulfate)
- ISO 8130-13, Coating powders — Part 13: Particle size analysis by laser diffraction
- ISO 14966, Ambient air — Determination of numerical concentration of inorganic fibrous particles — Scanning electron microscopy method
- ISO 18451-1, Pigments, dyestuffs and extenders — Terminology — Part 1: General terms
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 18451-1 and the following apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
3.1
natural talc, in lamellar form, containing carbonates
natural association of hydrated magnesium silicate 3MgO·4SiO2·H2O | Mg3[(OH)2/Si4O10] and carbonates, for example dolomite CaMg(CO3)2 and magnesite MgCO3