この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化機関 (ISO 会員団体) の世界的な連合体です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。
国際規格 ISO 3284 は ISO/TC 101 技術委員会「連続機械取扱い装置」によって作成され、1973 年 11 月に加盟団体に回覧されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | ドイツ | スペイン |
| ベルギー | インド | スウェーデン |
| ブルガリア | アイルランド | タイ |
| チェコスロバキア | イタリア | 七面鳥 |
| エジプト、アラブ共和国 | オランダ | イギリス |
| フィンランド | ポーランド | ソビエト連邦 |
| フランス | 南アフリカ共和国 | ユーゴスラビア |
この文書に不承認を表明した加盟団体はなかった。
1 適用範囲と分野
この国際規格は、ばら積みの材料を空気圧で取り扱う際に使用する曲げの寸法を、軽量、中程度、重量の 3 つのシリーズで指定しています。
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO Member Bodies). The work of developing International Standards is carried out through ISO Technical Committees. Every Member Body interested in a subject for which a Technical Committee has been set up has the right to be represented on that Committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated to the Member Bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 3284 was drawn up by Technical Committee ISO/TC 101, Continuous mechanical handling equipment, and circulated to the Member Bodies in November 1973.
It has been approved by the Member Bodies of the following countries:
| Australia | Germany | Spain |
| Belgium | India | Sweden |
| Bulgaria | Ireland | Thailand |
| Czechoslovakia | Italy | Turkey |
| Egypt, Arab Rep. of | Netherlands | United Kingdom |
| Finland | Poland | U.S.S.R. |
| France | South Africa, Rep. of | Yugoslavia |
No Member Body expressed disapproval of the document.
1 SCOPE AND FIELD OF APPLICATION
This International Standard specifies the dimensions of bends for use in pneumatic handling for loose bulk materials, in three series: light, moderate and heavy.