この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO メンバー団体) の世界的な連合です。国際規格の策定作業は、ISO 技術委員会を通じて実施されます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。
国際規格 ISO 32 は、技術委員会 ISO/TC 58, ガス シリンダーによって開発されました。
これは、ISO の技術業務に関する指令の 6.12.1 節に従って、ISO 理事会に直接提出されました。これは、以下の国の加盟団体によって承認された ISO 勧告 R 32-1957 とその修正 1-1966 を取り消し、置き換えます。
| オーストラリア | アイルランド | 南アフリカ共和国 |
| ベルギー | イスラエル | スペイン |
| カナダ | イタリア | スウェーデン |
| デンマーク | メキシコ | イギリス |
| フィンランド | オランダ | アメリカ |
| ハンガリー | ニュージーランド | ユーゴスラビア |
| インド | パキスタン |
次の国のメンバー団体は、技術的な理由で文書の不承認を表明しました:
| オーストリア | |
| フランス | |
| 日本 | |
| スイス |
1 適用範囲と適用分野
この国際規格は、医療用のみを目的としたガスボンベの内容物を識別するためのマーキングシステムと一連の色を確立しています。
ガス混合物の場合、ボンベは、混合物を構成するガスに適した色を付けなければならず、そのような色はバルブの端から見えるものでなければならない。
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 32 was developed by Technical Committee ISO/TC 58, Gas cylinders.
It was submitted directly to the ISO Council, in accordance with clause 6.12.1 of the Directives for the technical work of ISO. It cancels and replaces ISO Recommendation R 32-1957, and its Amendment 1-1966, which had been approved by the member bodies of the following countries:
| Australia | Ireland | South Africa, Rep. of |
| Belgium | Israel | Spain |
| Canada | Italy | Sweden |
| Denmark | Mexico | United Kingdom |
| Finland | Netherlands | U.S.A. |
| Hungary | New Zealand | Yugoslavia |
| India | Pakistan |
The member bodies of the following countries had expressed disapproval of the document on technical grounds:
| Austria | |
| France | |
| Japan | |
| Switzerland |
1 SCOPE AND FIELD OF APPLICATION
This International Standard establishes a system of marking and a series of colours for the identification of the content of gas cylinders intended for medical use only.
In the case of gas mixtures, the cylinder shall bear the appropriate colours for the gases comprising the mixture, such colours to be visible from the valve end.