※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。これらは、加盟団体の投票による少なくとも 75% の承認を必要とする ISO 手順に従って承認されます。
国際規格 ISO 3305 は、ISO/TC 5鉄金属パイプおよび金属継手に関する技術委員会によって作成されました。
この第 2 版は、技術的な改訂を構成する第 1 版 (ISO 3305-1976) を廃止し、置き換えるものです。
ユーザーは、特に明記されていない限り、すべての国際規格は随時改訂されること、および他の国際規格への言及はその最新版を意味することに留意する必要があります。
1 適用範囲と適用分野
この国際規格は、表 2 に示す鋼種から製造され、精密な寸法公差を持ち、ISO 4200 から選択された表 9 に示す寸法で製造されたプレーンエンドの溶接管の納入に関する技術条件を指定します。
この国際規格に準拠したチューブは、主に寸法精度、および必要に応じて薄肉および表面仕上げが重要where される用途に使用されます。
このようなチューブが油圧配管装置での使用を目的としている場合は、焼きなましまたは正規化された出荷状態でのみ使用する必要があります。
参考文献2件
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting.
International Standard ISO 3305 was prepared by Technical Committee ISO/TC 5, Ferrous metal pipes and metallic fittings.
This second edition cancels and replaces the first edition (ISO 3305-1976), of which it constitutes a technical revision.
Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated.
1 Scope and field of application
This International Standard specifies the technical conditions for delivery of welded tubes with plain ends, manufactured from the grades of steel shown in table 2, with precision dimensional tolerances and in those dimensions shown in table 9 which have been selected from ISO 4200.
Tubes in accordance with this International Standard are used mainly for purposes where importance attaches to dimensional accuracy and, if required, small thicknesses and surface finish.
If such tubes are intended for use in hydraulic piping equipment, they shall be used only in the annealed or normalized delivery condition.
2 References
- ISO 404, Steel and steel products — Genera! technical delivery requirements.
- ISO 2604/3, Steel products for pressure purposes — Quality requirements — Part 3: Electric resistance and induction-welded tubes.
- ISO 3545, Steel tubes and tubular shaped accessories with circular cross-section — Symbols to be used in specifications.
- ISO 4200, Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length.
- ISO 6892, Metallic materials — Tensile testing.
- ISO 8492, Metallic materials — Tubes — Flattening test. 1)
- ISO 8493, Metallic materials — Tubes — Drift expanding test. 2)