※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 3394 は、ISO/TC 122, パッケージング技術委員会によって作成されました。
この第 3 版は、技術的に改訂された第 2 版 (ISO 3394:1984) を廃止し、置き換えるものです。
1 スコープ
この国際規格は、ISO 3676 に概説されている 600 mm × 400 mm, 600 mm × 500 mm, および 550 mm × 366 mm の標準平面寸法 (モジュール) に基づいて、堅い長方形の輸送パッケージの一連の寸法を規定しています。 4 つのシリーズ (1 219 mm × 1 016 mm, 1 200 mm × 1 000 mm, 1 200 mm × 800 mm, 1 100 mm × 1 100 mm) の平面寸法を定義します。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 21067, パッケージング - 語彙
- ISO 6780:2003, 大陸間マテリアルハンドリング用フラットパレット - 主な寸法と公差
3 用語と定義
この文書の目的のために、ISO 21067 および以下に示されている用語と定義が適用されます。
3.1
平面寸法
直角に交差する 4 つの垂直面によって水平面上に定義され、その面上に自立する輸送パッケージを囲む長方形の寸法
注記 1: 図 1 を参照。
3.2
荷重バルジ
充填、静的および動的圧縮、劣化および乱積みによって引き起こされる貨物の膨張。輸送用梱包材、内容物の特性、充填/詰め方、保管期間、湿度および温度条件、および状態の影響を受けます。交通手段など
参考文献
| 1 | ISO 3676, 梱包 - 完全な充填済み輸送パッケージと単位積載量 - 単位積載量の寸法 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 3394 was prepared by Technical Committee ISO/TC 122, Packaging
This third edition cancels and replaces the second edition (ISO 3394:1984), which has been technically revised.
1 Scope
This International Standard sets forth a series of dimensions for rigid rectangular transport packages, based on the standard plan dimension (module) of 600 mm × 400 mm, 600 mm × 500 mm and 550 mm × 366 mm, as outlined in ISO 3676, which defines the plan dimensions of four series (1 219 mm × 1 016 mm, 1 200 mm × 1 000 mm, 1 200 mm × 800 mm, 1 100 mm × 1 100 mm).
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 21067, Packaging — Vocabulary
- ISO 6780:2003, Flat pallets for intercontinental materials handling — Principal dimensions and tolerances
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 21067 and the following apply.
3.1
plan dimensions
dimensions of the rectangle defined on a horizontal surface by the four vertical planes intersecting at right angles which enclose a transport package freestanding on that surface
Note 1 to entry: See Figure 1.
3.2
load bulge
swelling of the freight which is caused by filling, both static and dynamic compression, deterioration and rough stacking, and is affected by transport packaging materials, characteristics of contents, method of filling/stuffing, duration of storage, humidity and temperature conditions, and condition of transportation, etc.
Bibliography
| 1 | ISO 3676, Packaging — Complete, filled transport packages and unit loads — Unit load dimensions |