※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 340 は、技術委員会 ISO/TC 41, プーリーおよびベルト (ビーベルトを含む) 、小委員会 SC 3, コンベヤー ベルトによって作成されました。
この第 4 版は、技術的に改訂された第 3 版 (ISO 340:2004) を取り消して置き換えるものです。 「燃焼」という言葉が「炎」に変更されました。
注意このテスト方法は、特定の製品の火災の危険性を評価するようには設計されていません。結果は発火危険性の評価に役立つかもしれませんが、製品または材料が安全であることの証拠として単独で使用すべきではありません。
1 スコープ
この国際規格は、着火炎源に対するコンベアベルトの反応を小規模に評価する方法を規定しています。スチールコードのコンベヤベルトだけでなく、繊維カーカスを有するコンベヤベルトにも適用できます。
2 参考文献
以下のドキュメントの全体または一部は、このドキュメントで規範的に参照されており、その適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 8056-1, 航空機 — ニッケルクロムおよびニッケルアルミニウム熱電対延長ケーブル — 1: コンダクター — 一般的な要件とテスト
- ISO 9162, 石油製品 - 燃料 (クラス F) - 液化石油ガス - 仕様
- ISO 18573, コンベヤ ベルト — 試験雰囲気と調整期間
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
3.1
残炎
着火源が取り除かれた後も持続する炎
[出典: 出典: ISO 13943:2008, 4.6]
3.2
火
通常、光の燃焼放出を伴う、気相のゾーン。
[出典: 出典: ISO 13943:2008, 4.133]
3.3
火
光の燃焼の放出を伴う気相で受ける
[出典: 出典: ISO 13943:2008, 4.134]
参考文献
| [1] | ISO/TR 10353: 1992, 1プラスチック — 国内および国際火災試験に使用される発火源の調査 |
| [2] | ISO 13943:2008, 火災安全 - 語彙 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 340 was prepared by Technical Committee ISO/TC 41, Pulleys and belts (including veebelts), Subcommittee SC 3, Conveyor belts.
This fourth edition cancels and replaces the third edition (ISO 340:2004), which has been technically revised. The word 'combustion' has been changed to 'flame'.
CAUTION This method of test is not designed to assess the fire hazard of any given product. The results may help in the assessment of ignition hazard but should not be used in isolation as evidence that a product or material is safe.
1 Scope
This International Standard specifies a method for assessing, on a small scale, the reaction of a conveyor belt to an ignition flame source. It is applicable to conveyor belts having a textile carcass as well as steel cord conveyor belts.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 8056-1, Aircraft — Nickel-chromium and nickel-aluminium thermocouple extension cables — 1: Conductors — General requirements and tests
- ISO 9162, Petroleum products — Fuels (class F) — Liquefied petroleum gases — Specifications
- ISO 18573, Conveyor belts — Test atmospheres and conditioning periods
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
afterflame
flame which persists after the ignition source has been removed
[SOURCE: SOURCE: ISO 13943:2008, 4.6]
3.2
flame
zone of combustion in the gaseous phase, usually with emission of light
[SOURCE: SOURCE: ISO 13943:2008, 4.133]
3.3
flame
to undergo combustion in the gaseous phase with emission of light
[SOURCE: SOURCE: ISO 13943:2008, 4.134]
Bibliography
| [1] | ISO/TR 10353:1992, 1Plastics — Survey of ignition sources used for national and international fire tests |
| [2] | ISO 13943:2008, Fire safety — Vocabulary |