※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO メンバー団体) の世界的な連合です。国際規格の策定作業は、ISO 技術委員会を通じて実施されます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。
国際規格 ISO 3419 は、技術委員会 ISO/TC 5, 金属パイプおよび継手によって開発され、1979 年 11 月にメンバー団体に回覧されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | ドイツ、フランス | 南アフリカ共和国 |
| オーストリア | ハンガリー | スペイン |
| ベルギー | インド | スウェーデン |
| ブラジル | イスラエル | スイス |
| カナダ | イタリア | アメリカ |
| チェコスロバキア | 大韓民国 | ソビエト連邦 |
| フィンランド | オランダ | |
| フランス | ルーマニア |
次の国のメンバー団体は、技術的な理由で文書の不承認を表明しました。
日本
イギリス
この第 2 版は、第 1 版 (つまり、ISO 3419-1975) を取り消して置き換えます。
1 適用範囲と適用分野
この国際規格は、非合金鋼、低合金鋼、および合金鋼の突合せ溶接ベンド (タイプ 2D (90° および 180°) および 3D (45°、90° および 180°)) の寸法、公差、および一般的に使用される等級を指定します。 、同心および偏心レジューサ、ティー、キャップ、およびスタブエンドは、配管作業に使用される品質要件を備えています。
2 参考文献
- ISO 404, 鉄鋼および鉄鋼製品 — 一般的な技術納入要件。1)
- ISO 2604/2, 圧力用鋼製品 — 品質要件 — 2: 鍛造シームレスチューブ。
- ISO 2604/3, 圧力用鋼製品 — 品質要件 — 3: 電気抵抗と誘導溶接管。
- ISO 2604/4, 圧力用鋼製品 — 品質要件 — 4: プレート。
- ISO 3183, 石油および天然ガス産業 — 鋼管。2)
- ISO 3545, 鋼管および円形断面の管状付属品 — 鋼管の仕様で使用される記号。2)
- ISO 3845, 石油および天然ガス産業 — 高試験鋼管。2)
- ISO 4200, プレーン エンド スチール チューブ、溶接およびシームレス — 単位長さあたりの寸法と従来の質量の一般的な表。
- ISO 6708, パイプ コンポーネント — 公称サイズの定義。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 3419 was developed by Technical Committee ISO/TC 5, Metal pipes and fittings, and was circulated to the member bodies in November 1979.
It has been approved by the member bodies of the following countries:
| Australia | Germany, F.R. | South Africa, Rep. of |
| Austria | Hungary | Spain |
| Belgium | India | Sweden |
| Brazil | Israel | Switzerland |
| Canada | Italy | USA |
| Czechoslovakia | Korea, Rep. of | USSR |
| Finland | Netherlands | |
| France | Romania |
The member bodies of the following countries expressed disapproval of the document on technical grounds:
Japan
United Kingdom
This second edition cancels and replaces the first edition (i.e. ISO 3419-1975).
1 Scope and field of application
This International Standard specifies the dimensions, tolerances and generally used grades of non-alloy, low-alloy and alloy steels for butt-welding bends (type 2D (90° and 180°) and 3D (45°, 90° and 180°), concentric and eccentric reducers, tees, caps and stub ends with quality requirements as used for piping work.
2 References
- ISO 404, Steel and steel products — General technical delivery requirements.1)
- ISO 2604/2, Steel products for pressure purposes — Quality requirements — 2: Wrought seamless tubes.
- ISO 2604/3, Steel products for pressure purposes — Quality requirements — 3: Electric resistance and induction-welded tubes.
- ISO 2604/4, Steel products for pressure purposes — Quality requirements — 4: Plates.
- ISO 3183, Oil and natural gas industries — Steel line pipe.2)
- ISO 3545, Steel tubes and tubular shaped accessories with circular cross-section — Symbols to be used in specifications for steel tubes.2)
- ISO 3845, Oil and natural gas industries — High-test steel line pipe.2)
- ISO 4200, Plain end steel tubes, welded and seamless — General tables of dimensions and conventional masses per unit length.
- ISO 6708, Pipe components — Definition of nominal size.