※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 3442-3 は、技術委員会 ISO/TC 39, 工作機械、小委員会 SC 8, スピンドルおよびチャックを保持するワークによって作成されました。
この ISO 3442-3 の初版は、ISO 3442-1 および ISO 3442-2 とともに、ISO 3442:1991 および ISO 9401:1991 を取り消して置き換えます。 ISO/TC 39/SC 8 は、ISO 3442:1991 を 3 つの部分に分割し、それらを ISO 9401:1991 と結合することを決定しました。 ISO 3442 の 3 つの部分がすべて発行されると、ISO 3442:1991 と ISO 9401:1991 は廃止されます。
ISO 3442 は、次の部分で構成されており、一般的なタイトルは「工作機械 - ツーピース ジョー付きセルフ センタリング チャックの寸法と幾何学的試験」です。
- Part 1: さねはぎタイプのジョーを備えた手動式チャック
- Part 2: さねはぎタイプのジョーを備えた電動チャック
- Part 3: 鋸歯状のジョーを備えた電動チャック
1 スコープ
ISO 3442 のこの部分では、互換性を確保するために、90° および 60° のセレーションと、パワー チャックのベース ジョーにトップ ジョーを取り付けるための 90° および 60° のセレーションに適用可能なジョー ナットを指定しています。また、ISO 230-1 を参照して、2 つ以上のツーピース ジョー (鋸歯状タイプ) を備えたセルフ センタリング電動チャックの幾何学的試験、および適用される対応する公差についても説明しています。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 230-1:1996, 工作機械のテスト コード — 1: 無負荷または仕上げ条件で動作する機械の幾何学的精度
- ISO 965-3, ISO 汎用メートルねじ — 公差 — 3: 構造上のねじ山の偏差
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 3442-3 was prepared by Technical Committee ISO/TC 39, Machine tools, Subcommittee SC 8, Work holding spindles and chucks.
This first edition of ISO 3442-3, together with ISO 3442-1 and ISO 3442-2, cancels and replaces ISO 3442:1991 and ISO 9401:1991. ISO/TC 39/SC 8 decided to divide ISO 3442:1991 into three parts and to combine them with ISO 9401:1991. When all three parts of ISO 3442 are published, ISO 3442:1991 and ISO 9401:1991 will be withdrawn.
ISO 3442 consists of the following parts, under the general title Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws:
- Part 1: Manually operated chucks with tongue and groove type jaws
- Part 2: Power-operated chucks with tongue and groove type jaws
- Part 3: Power-operated chucks with serrated jaws
1 Scope
This part of ISO 3442 specifies 90° and 60° serrations and jaw nuts applicable to 90° and 60° serrations for mounting the top jaws on the base jaws of power chucks, in order to ensure interchangeability. It also describes, with reference to ISO 230-1, the geometric tests for self-centring, power-operated chucks with two or more two-piece jaws (serrated type), and the corresponding tolerances which apply.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 230-1:1996, Test code for machine tools — 1: Geometric accuracy of machines operating under no-load or finishing conditions
- ISO 965-3, ISO general purpose metric screw threads — Tolerances — 3: Deviations for constructional screw threads