ISO 3452-3:2013 非破壊検査—浸透探傷試験—パート3：参照テストブロック | ページ 2

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patents

Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.

For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information

The committee responsible for this document is ISO/TC 135, Non-destructive testing, Subcommittee SC 2, and by Technical Committee CEN/TC 138, Non-destructive testing in collaboration.

This second edition cancels and replaces the first edition (ISO 3452-3:1998), which has been technically revised. It also incorporates the Technical Corrigendum ISO 3452-3:1998/Cor 1:2001.

ISO 3452 consists of the following parts, under the general title Non-destructive testing — Penetrant testing:

• Part 1: General principles
• Part 2: Testing of penetrant materials
• Part 3: Reference test blocks
• Part 4: Equipment
• Part 5: Penetrant testing at temperatures higher than 50 °C
• Part 6: Penetrant testing at temperatures lower than 10 °C

1 Scope

This International Standard describes two types of reference blocks:

• Type 1 reference blocks are used to determine the sensitivity levels of both fluorescent and colour contrast penetrant product families;
• Type 2 reference blocks are used for routine assessment of the performance of both fluorescent and colour contrast penetrant testing.

The reference blocks are to be used in accordance with part 1 of this International Standard.

2 Normative references

The following referenced documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

Bibliography