※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 3 に規定されている規則に従って起草されています。
国際規格 ISO 3507 は、技術委員会 ISO/TC 48, 実験用ガラス器具および関連装置、小委員会 SC 4, 密度測定機器によって作成されました。
この第 2 版は、以下の変更を組み込むことにより、第 1 版 (ISO 3507:1976) を取り消して置き換えます。
- a)タイトルが変更されました。
- b) 1ml, 2ml, 5ml, 100mlのGay-Lussac比重瓶が追加されました。
- c) 10 ml および 100 ml の Reischauer 比重瓶が追加されました。
- d) 50 ml のハバード比重瓶が追加されました。
- e)地面に埋め込まれた温度計とキャピラリー サイド チューブを備えた比重瓶が追加されました。
1 スコープ
この国際規格は、液体の密度を決定するための一般的な実験室用の一連の比重瓶の要件を指定しています。
特定の製品で使用するための特殊なピクノメータ、または一般的に使用されていないピクノメータは除外されます。そのような比重計を定義するのに十分な詳細は、それらの使用を指定または説明する国際規格に含まれるべきです。
Reischauerピクノメーターの首の液体レベルの調整に適した装置は、附属書Aに示されています.
2 参考文献
次の規範文書には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。日付の記載された参考資料については、これらの刊行物に対するその後の修正または改訂は適用されません。ただし、この国際規格に基づく協定の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することをお勧めします。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
International Standard ISO 3507 was prepared by Technical Committee ISO/TC 48, Laboratory glassware and related apparatus, Subcommittee SC 4, Density measuring instruments.
This second edition cancels and replaces the first edition (ISO 3507:1976) by incorporating the following changes:
- a) the title has been modified;
- b) Gay-Lussac pyknometers of 1 ml, 2 ml, 5 ml and 100 ml have been added;
- c) Reischauer pyknometers of 10 ml and 100 ml have been added;
- d) a Hubbard pyknometer of 50 ml has been added;
- e) pyknometers with ground-in thermometer and capillary side tube have been added.
1 Scope
This International Standard specifies requirements for a series of pyknometers for general laboratory use for the determination of the densities of liquids.
Specialized pyknometers for use with particular products, or otherwise not in common use, are excluded. Sufficient details to define such pyknometers should be included in International Standards which specify or describe their use.
A device suitable for adjustment of the liquid level in the neck of the Reischauer pyknometer is shown in annex A.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 383, Laboratory glassware — Interchangeable conical ground joints.
- ISO 384:1978, Laboratory glassware — Principles of design and construction of volumetric glassware.
- ISO 386, Liquid-in-glass laboratory thermometers — Principles of design, construction and use.
- ISO 719, Glass — Hydrolytic resistance of glass grains at 98 °С — Method of test and classification.
- ISO 3585, Borosilicate glass 3.3 — Properties.