※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 3.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に回覧されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
この国際規格の一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 3518 は、技術委員会 ISO/TC 54, エッセンシャル オイルによって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 3518:1979) および ISO 7610:1985 を取り消し、置き換えます。
この国際規格の附属書 A および B は、情報提供のみを目的としています。
1 スコープ
この国際規格は、その品質の評価を容易にするために、白檀の油 (サンタラム アルバムL.) の特定の特性を指定します。
2 参考文献
次の規範文書には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。日付の記載された参考資料については、これらの刊行物に対するその後の修正または改訂は適用されません。ただし、この国際規格に基づく協定の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することをお勧めします。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO/TR 210, エッセンシャル オイル — 包装、コンディショニング、および保管に関する一般規則
- ISO/TR 211, エッセンシャル オイル — 容器のラベル付けとマーキングに関する一般規則
- ISO 212, エッセンシャル オイル — サンプリング
- ISO 279, エッセンシャル オイル — 20 ℃ での相対密度の測定 — 参照方法
- ISO 280, エッセンシャル オイル — 屈折率の測定
- ISO 592, エッセンシャル オイル — 旋光度の測定
- ISO 709, エッセンシャル オイル — エステル価の測定
- ISO 875, エッセンシャル オイル — エタノール中の混和性の評価
- ISO 3793, エッセンシャル オイル — ピリジンのアセチル化による第一級および第二級の遊離アルコール含有量の推定
- ISO 7609, エッセンシャル オイル - キャピラリー カラムのガスクロマトグラフィーによる分析 - 一般的な方法
- ISO 11024-1, エッセンシャル オイル — クロマトグラフィー プロファイルに関する一般的なガイダンス — 1: 標準で提示するためのクロマトグラフィープロファイルの準備
- ISO 11024-2, エッセンシャル オイル — クロマトグラフィー プロファイルに関する一般的なガイダンス — 2: エッセンシャル オイルのサンプルのクロマトグラフィー プロファイルの利用
3 用語と定義
この国際規格の目的のために、次の用語と定義が適用されます。
3.1
サンダルウッドのオイル
Santalacae科のSantalum album L.の心材の水蒸気蒸留によって得られるエッセンシャルオイル
注記1 CAS番号については、ISO/TR 21092を参照。
参考文献
| [1] | ISO/TR 11018:1997, エッセンシャル オイル —– 引火点の決定に関する一般的なガイダンス |
| [2] | ISO/TR 21092:— 1) 、エッセンシャル オイル — 特徴付け |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 3.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 3518 was prepared by Technical Committee ISO/TC 54, Essential oils.
This second edition cancels and replaces the first edition (ISO 3518:1979) and also ISO 7610:1985, which have been technically revised.
Annexes A and B of this International Standard are for information only.
1 Scope
This International Standard specifies certain characteristics of the oil of sandalwood (Santalum album L.), in order to facilitate assessment of its quality.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO/TR 210, Essential oils — General rules for packaging, conditioning and storage
- ISO/TR 211, Essential oils — General rules for labeling and marking of containers
- ISO 212, Essential oils — Sampling
- ISO 279, Essential oils — Determination of relative density at 20 degrees C — Reference method
- ISO 280, Essential oils — Determination of refractive index
- ISO 592, Essential oils — Determination of optical rotation
- ISO 709, Essential oils —Determination of ester value
- ISO 875, Essential oils — Evaluation of miscibility in ethanol
- ISO 3793, Essential oils — Estimation of primary and secondary free alcohols content by acetylation in pyridine
- ISO 7609, Essential oils — Analysis by gas chromatography on capillary columns — General method
- ISO 11024-1, Essential oils — General guidance on chromatographic profiles — 1: Preparation of chromatographic profiles for presentation in standards
- ISO 11024-2, Essential oil — General guidance on chromatographic profiles — 2: Utilization of chromatographic profiles of samples of essential oils
3 Term and definition
For the purposes of this International Standard, the following term and definition apply.
3.1
oil of sandalwood
essential oil obtained by steam distillation of the heartwood of Santalum album L., of the Santalaceae family
Note 1 to entry: For information on CAS numbers, see ISO/TR 21092.
Bibliography
| [1] | ISO/TR 11018:1997, Essential oils —– General guidance on the determination of flashpoint |
| [2] | ISO/TR 21092:— 1) , Essential oils — Characterization |