※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用された手順と、今後の維持を意図した手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語と表現の意味に関する説明、および技術的貿易障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照してください: www.iso.org/iso/序文.html .
この文書は、技術委員会 ISO/TC 123, すべり軸受、小委員会 SC 3, 寸法、公差、および構造の詳細によって作成されました。
この第 3 版は、技術的に改訂された第 2 版 (ISO 3547-3:2006) を取り消して置き換えるものです。
- ISO 3547 シリーズのすべての部品のリストは、ISO Web サイトで見つけることができます。
1 スコープ
この文書は、滑り軸受用途向けの単層および多層軸受材料で作られたラップされたブッシュの潤滑穴、溝、およびボアのくぼみの寸法を指定します。
注記この文書に準拠した潤滑穴、溝、またはボアのくぼみを備えたラッピング ブシュは、ISO 3547-1 に準拠した寸法で、ISO 3547-4 に準拠した材料で作成することができます。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、テキスト内で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 3547-1, すべり軸受 — ラップされたブッシュ — 1: 寸法
- ISO 4378-1, すべり軸受 — 用語、定義、分類および記号 — 1: 設計、軸受材料とその特性
- ISO 4378-4, すべり軸受 — 用語、定義、分類および記号 — 4: 基本記号
3 用語と定義
このドキュメントの目的のために、ISO 4378-1 および ISO 4378-4 に記載されている用語と定義が適用されます。
ISO および IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
参考文献
| [1] | ISO 3547-2, すべり軸受 — ラップブッシュ — 2: 外径と内径の試験データ |
| [2] | ISO 3547-4, すべり軸受 — ラップされたブッシュ — 4: 材料 |
| [3] | ISO 3547-7, すべり軸受 — ラップされたブッシュ — 7: 薄肉ブッシュの肉厚測定 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 123, Plain bearings, Subcommittee SC 3, Dimensions, tolerances and construction details.
This third edition cancels and replaces the second edition (ISO 3547-3:2006), which has been technically revised.
- A list of all the parts in the ISO 3547 series can be found on the ISO website.
1 Scope
This document specifies dimensions of lubrication holes, grooves and bore indentations on wrapped bushes made of mono and multi-layer bearing material for plain bearing applications.
NOTE Wrapped bushes with lubrication holes, grooves or bore indentations in accordance with this document can be ordered with dimensions in accordance with ISO 3547-1 and made from materials in accordance with ISO 3547-4.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 3547-1, Plain bearings — Wrapped bushes — 1: Dimensions
- ISO 4378-1, Plain bearings — Terms, definitions, classification and symbols — 1: Design, bearing materials and their properties
- ISO 4378-4, Plain bearings — Terms, definitions, classification and symbols — 4: Basic symbols
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 4378-1 and ISO 4378-4 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| [1] | ISO 3547-2, Plain bearings — Wrapped bushes — 2: Test data for outside and inside diameters |
| [2] | ISO 3547-4, Plain bearings — Wrapped bushes — 4: Materials |
| [3] | ISO 3547-7, Plain bearings — Wrapped bushes — 7: Measurement of wall thickness of thin-walled bushes |