※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令第 1 Part に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www を 参照してください。 .iso.org/iso/foreword.html
この文書は、技術委員会 ISO/TC 4, 転がり軸受、分科会 SC 9, 円すいころ軸受によって作成されました。
この第 3 版は、技術的に改訂された第 2 版 (ISO 355:2007) を廃止し、置き換えるものです。また、改正 ISO 355:2007/Amd.1:2012 も組み込まれています。前版との主な変更点は以下の通りです。
- 複列軸受表に内輪裏面の接触角と最小一面取り寸法を追加しました。
- フランジ付き外輪を備えた軸受のすべての寸法を追加した表。
1 スコープ
この文書では、完全な単列および複列円すいころ軸受の軸受およびサブユニットの境界寸法を指定します。また、これらのベアリングの選択に対するフランジ付き外輪のフランジ寸法も指定します。各ベアリングのシリーズ名も指定されています。
2 規範的参照
以下の文書は、その内容の一部またはすべてがこの文書の要件を構成する形で本文中で参照されています。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 492, 転がり軸受 — ラジアル軸受 — 幾何学的製品仕様 (GPS) および公差値
- ISO 582, 転がり軸受 — 面取り寸法 — 最大値
- ISO 1132-1, 転がり軸受 - 公差 - Part 1: 用語と定義
- ISO 5593, 転がり軸受 — 語彙
- ISO 15241, 転がり軸受 — 物理量の記号
3 用語と定義
この文書の目的には、ISO 1132-1 および ISO 5593 で与えられる用語と定義が適用されます。
ISO と IEC は、標準化に使用する用語データベースを次のアドレスで維持しています。
参考文献
| 1 | ISO 10317, 転がり軸受 — 円すいころ軸受 — 指定システム |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 4, Rolling bearings, Subcommittee SC 9, Tapered roller bearings.
This third edition cancels and replaces the second edition (ISO 355:2007), which has been technically revised. It also incorporates the Amendment ISO 355:2007/Amd.1:2012. The main changes compared to the previous edition are as follows:
- Contact angle and smallest single chamfer dimension of the inner ring back face added to the double-row bearing tables.
- Tables with all dimensions added for bearings with flanged outer rings.
1 Scope
This document specifies bearing and subunit boundary dimensions for complete single-row and double-row tapered roller bearings. It also specifies the flange dimensions of flanged outer rings for a selection of these bearings. A series designation for each bearing is also specified.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 492, Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values
- ISO 582, Rolling bearings — Chamfer dimensions — Maximum values
- ISO 1132-1, Rolling bearings — Tolerances — Part 1: Terms and definitions
- ISO 5593, Rolling bearings — Vocabulary
- ISO 15241, Rolling bearings — Symbols for physical quantities
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 1132-1 and ISO 5593 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| 1 | ISO 10317, Rolling bearings — Tapered roller bearings — Designation system |