※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 35 は、技術委員会 ISO/TC 45, ゴムおよびゴム製品、小委員会 SC 3, ゴム産業で使用するための原材料 (ラテックスを含む) によって作成されました。
この第 5 版は、条項 8 と 9 が技術的に改訂された第 4 版 (ISO 35:1995) を取り消して置き換えます。主な変更点は、エンドポイントの評価方法に関するいくつかのオプションの削除と、結果の報告方法の明確化です。
警告 — この国際規格を使用する人は、通常の実験室の慣行に精通している必要があります。この規格は、その使用に関連する安全上の問題があったとしても、そのすべてに対処することを意図していません。適切な安全衛生慣行を確立し、国内の規制条件を確実に遵守することは、ユーザーの責任です。
1 スコープ
この国際規格は、天然ゴムラテックス濃縮物の機械的安定性の測定方法を規定しています。また、加硫前の天然ゴムラテックス濃縮物にも適用できます。
この方法は、水酸化カリウムで保存されたラテックスまたは予備加硫ラテックス、パラゴムノキ以外の天然源からのラテックス、またはゴムの配合ラテックスまたは人工分散液には必ずしも適しておらず、合成ゴムラテックスには適用できません。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 123, ゴムラテックス - サンプリング
- ISO 124, ラテックス、ゴム — 全固形分の測定
- ISO 125, 天然ゴムラテックス濃縮物 — アルカリ度の測定
- ISO 3310-1, 試験用ふるい — 技術要件と試験 — 1: 金属ワイヤー クロスのふるいをテストします。
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
3.1
天然ゴムラテックス濃縮物
水酸化カリウムを除く、アンモニアおよび/またはその他の防腐剤を含む天然ゴムラテックスで、何らかの濃縮プロセスにかけられたもの
3.2
機械的安定性
指定された試験条件下で目に見える凝集を開始するのに必要な時間 (秒単位)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 35 was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 3, Raw materials (including latex) for use in the rubber industry.
This fifth edition cancels and replaces the fourth edition (ISO 35:1995), Clauses 8 and 9 of which have been technically revised. The principal changes are the removal of a number of options for the method of assessing the end-point and clarification of the manner in which the result is reported.
WARNING — Persons using this International Standard should be familiar with normal laboratory practice. This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions.
1 Scope
This International Standard specifies a method for the determination of the mechanical stability of natural rubber latex concentrate. It is also applicable to prevulcanized natural rubber latex concentrate.
The method is not necessarily suitable for latices or prevulcanized latex preserved with potassium hydroxide, latices from natural sources other than Hevea brasiliensis, or for compounded latex or artificial dispersions of rubber, and it is not applicable to synthetic rubber latices.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 123, Rubber latex — Sampling
- ISO 124, Latex, rubber — Determination of total solids content
- ISO 125, Natural rubber latex concentrate — Determination of alkalinity
- ISO 3310-1, Test sieves — Technical requirements and testing — 1: Test sieves of metal wire cloth
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
natural rubber latex concentrate
natural rubber latex containing ammonia and/or other preservatives, with the exception of potassium hydroxide, and which has been subjected to some process of concentration
3.2
mechanical stability
time, in seconds, required to initiate visible flocculation under the specified test conditions