※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令第 2 Part に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 363-2 は、技術委員会 ISO/TC 72, 繊維機械および付属品、小委員会 SC 3, 準備機械および付属品を含む布地製造用機械によって作成されました。
ISO 363 は、一般タイトル「繊維機械および付属品 - 閉端ループ付き平鋼ヘルド」の下に、次の部分で構成されています。
- Part 1: 圧延鋼線で製造されたヘルドの寸法
- Part 2: 硬化帯鋼で製造されたヘルドの寸法
1 スコープ
ISO 363 のこの部分では、繊維産業で使用するために硬化ストリップ鋼で製造された、閉じたエンド ループ (O 形のエンド ループ) を備えた平鋼ヘルドの主な寸法と公差を指定します。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 363-2 was prepared by Technical Committee ISO/TC 72, Textile machinery and accessories, Subcommittee SC 3, Machinery for fabric manufacturing including preparatory machinery and accessories.
ISO 363 consists of the following parts, under the general title Textile machinery and accessories — Flat steel healds with closed end loops:
- Part 1: Dimensions of healds manufactured of rolled steel wire
- Part 2: Dimensions of healds manufactured of hardened strip steel
1 Scope
This part of ISO 363 specifies the main dimensions and tolerances of flat steel healds with closed end loops (O-shaped end loops), manufactured of hardened strip steel for use in the textile industry.