※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化機関 (ISO 会員団体) の世界的な連合体です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。
国際規格 ISO 3646 は ISO/TC 36映画撮影技術委員会によって作成され、1975 年 2 月に加盟団体に配布されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | インド | スウェーデン |
| オーストリア | イタリア | スイス |
| ベルギー | 日本 | 七面鳥 |
| カナダ | オランダ | イギリス |
| チェコスロバキア | ルーマニア | アメリカ合衆国 |
| デンマーク | 南アフリカ共和国 | ソビエト連邦 |
| フランス | スペイン | ユーゴスラビア |
この文書に不承認を表明した加盟団体はなかった。
1 適用範囲と分野
この国際規格は、モデル II 8 mm Type S フィルム カメラ カートリッジのカートリッジ スロット、突起、穴の寸法と位置を指定しています。このカートリッジは、メーカーから同梱されている場合、実効フィルム速度に従って一部のカメラを自動的にプリセットし、挿入または挿入します。カラーバランスフィルターを取り除きます。可能な組み合わせと、可視フィルムの識別に利用できる領域についても説明します。
2 参考文献
- ISO 1700, 映画撮影 — 8 mm Type S 映画生ストック フィルム — 切断および穿孔の寸法。
- ISO 1787, 映画撮影 — 8 mm 映画フィルムの穴あきType S のカメラの使用。
- ISO 2863, 映画撮影 — 映画カメラ カートリッジ、8 mm Type S モデル II — フィルムのランレングス — 寸法と仕様。
- ISO 3025, 映画撮影 — 映画カメラ カートリッジ、8 mm Type S モデル II — フィルム ロード位置。
- ISO 3641, 映画撮影 — 映画カメラ カートリッジ、8 mm Type S モデル II — カートリッジの取り付けと巻き取りコア ドライブ — 寸法と仕様。
- ISO 3645, 映画撮影 — 8 mm Type S 映画カメラの絞りによって生成される画像領域と最大投影可能な画像領域 — 位置と寸法。
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO Member Bodies). The work of developing International Standards is carried out through ISO Technical Committees. Every Member Body interested in a subject for which a Technical Committee has been set up has the right to be represented on that Committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated to the Member Bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 3646 was drawn up by Technical Committee ISO/TC 36, Cinematography, and circulated to the Member Bodies in February 1975.
It has been approved by the Member Bodies of the following countries:
| Australia | India | Sweden |
| Austria | Italy | Switzerland |
| Belgium | Japan | Turkey |
| Canada | Netherlands | United Kingdom |
| Czechoslovakia | Romania | U.S.A. |
| Denmark | South Africa, Rep. of | U.S.S.R. |
| France | Spain | Yugoslavia |
No Member Body expressed disapproval of the document.
1 SCOPE AND FIELD OF APPLICATION
This International Standard specifies the dimensions and location of cartridge slots, projections and a hole for the Model II 8 mm Type S film camera cartridge which, when included by the manufacturer, automatically preset some cameras in accordance with the effective film speed, and insert or withdraw a colour-balancing filter. The combinations which are possible, together with the area available for visible film identification, are also described.
2 REFERENCES
- ISO 1700, Cinematography — 8 mm Type S motion-picture raw stock film — Cutting and perforating dimensions.
- ISO 1787, Cinematography — Camera usage of 8 mm motion-picture film perforated Type S.
- ISO 2863, Cinematography — Motion-picture camera cartridge, 8 mm Type S Model II — Run length of film — Dimensions and specifications.
- ISO 3025, Cinematography — Motion-picture camera cartridge, 8 mm Type S Model II — Film load position.
- ISO 3641, Cinematography — Motion-picture camera cartridge, 8 mm Type S Model II — Cartridge fit and take-up core drive — Dimensions and specifications.
- ISO 3645, Cinematography — Image area produced by 8 mm Type S motion-picture camera aperture and maximum projectable image area — Positions and dimensions.