※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 3759 は、技術委員会 ISO/TC 38, 繊維、小委員会 SC 2, クレンジング、仕上げおよび耐水性試験によって作成されました。
この第 5 版は、マイナー リビジョンを構成する第 4 版 (ISO 3759:2007) を取り消して置き換えるものです。 ISO 15797 は、箇条 , 箇条 , および箇条 9 (標本の処理) に追加されました。 6.1 では、2 番目と 3 番目の段落が逆になっています。
1 スコープ
この国際規格は、次の手順に従って、洗濯、ドライクリーニング、水への浸漬、蒸気処理などの特定の処理後の寸法変化を評価するための試験で使用する織物、衣類、および織物アセンブリの準備、マーキング、および測定の方法を指定します。 ISO 3005, ISO 7771, ISO 6330, ISO 3175, または ISO 1579この国際規格は、織物および編物、および織物製品に適用されます。この手順は、特定の室内装飾品には適用されません。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 3759 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 2, Cleansing, finishing and water resistance tests.
This fifth edition cancels and replaces the fourth edition (ISO 3759:2007), of which it constitutes a minor revision. ISO 15797 has been added to Clause 1 (Scope), to Clause 2 (Normative references) and to Clause 9 (Treatment of specimens); and in 6.1, the second and the third paragraphs were inverted.
1 Scope
This International Standard specifies a method for the preparation, marking and measuring of textile fabrics, garments and fabric assemblies for use in tests for assessing dimensional change after a specified treatment, e.g. washing, dry cleaning, soaking in water and steaming, following the procedures in ISO 3005, ISO 7771, ISO 6330, ISO 3175 or ISO 15797. This International Standard is applicable to woven and knitted fabrics, and made-up textile articles. The procedures are not applicable to certain upholstery coverings.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 139, Textiles — Standard atmospheres for conditioning and testing
- ISO 3005, Textiles — Determination of dimensional change of fabrics induced by free-steam
- ISO 3175 (all parts), Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments
- ISO 6330, Textiles — Domestic washing and drying procedures for textile testing
- ISO 7771, Textiles — Determination of dimensional changes of fabrics induced by cold-water immersion
- ISO 15797, Textiles — Industrial washing and finishing procedures for testing of workwear
- ISO 22198, Textiles — Fabrics — Determination of width and length