※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO 加盟団体) の世界的な連合です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のために加盟機関に回覧されます。
国際規格 ISO 3791 は、技術委員会 ISO/TC 95, オフィス マシンによって起草され、1975 年 5 月に加盟団体に回覧されました。
以下の国の加盟団体によって承認されています。
この文書の不承認を表明した加盟団体はありませんでした。
| オーストラリア | イタリア | 七面鳥 |
| チェコスロバキア | 日本 | イギリス |
| フランス | ルーマニア | アメリカ |
| ドイツ | スウェーデン | ソビエト連邦 |
| イラン | スイス | ユーゴスラビア |
1 スコープ
この国際規格は、データが一般に数値であるアプリケーションで使用されることを意図した、キーボード上の数字および記号の基本的なレイアウトを指定します。
3 参照
- ISO 1092, 機械の追加と計算機 テンキー キーボードの数値セクション。
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO Member Bodies). The work of developing International Standards is carried out through ISO Technical Committees. Every Member Body interested in a subject for which a Technical Committee has been set up has the right to be represented on that Committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated to the Member Bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 3791 was drawn up by Technical Committee ISO/TC 95, Office machines, and was circulated to the Member Bodies in May 1975.
It has been approved by the Member Bodies of the following countries:
No Member Body expressed disapproval of the document.
| Australia | Italy | Turkey |
| Czechoslovakia | Japan | United Kingdom |
| France | Romania | U.S.A. |
| Germany | Sweden | U.S.S.R. |
| Iran | Switzerland | Yugoslavia |
1 SCOPE
This International Standard specifies the basic layout of numerals and symbols on keyboards intended to be used in applications where the data are generally numeric.
3 REFERENCE
- ISO 1092, Adding machines and calculating machines Numeric section of ten-key keyboards.