ISO 3809:2004 機械的手段によって得られたライムオイル(コールドプレス)、メキシカンタイプ(Citrus aurantifolia(Christm。)Swingle) | ページ 2

※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。

序文

ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。

国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。

技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。

この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。

ISO 3809 は、ISO/TC 54, エッセンシャル オイル技術委員会によって作成されました。

この第 3 版は、技術的に改訂された第 2 版 (ISO 3809:1987) を廃止し、置き換えるものです。

1 スコープ

この国際規格は、その品質の評価を容易にするために、メキシコタイプの石灰油(冷間圧搾)[ Citrus aurantifolia (Christm.) Swingle] の特定の特性を指定しています。

2 規範的参照

この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。

  • ISO/TR 210, エッセンシャルオイル — 包装、調整、および保管に関する一般規則
  • ISO/TR 211, エッセンシャルオイル — 容器のラベルおよびマーキングに関する一般規則
  • ISO 212, エッセンシャル オイル — サンプリング
  • ISO 279, エッセンシャルオイル — 20 °C での相対密度の測定 — 参照方法
  • ISO 280, エッセンシャルオイル — 屈折率の測定
  • ISO 592, エッセンシャルオイル - 旋光度の測定
  • ISO 1271, エッセンシャルオイル - カルボニル価の測定 - 遊離ヒドロキシルアミン法
  • ISO 4715, エッセンシャルオイル — 蒸発時の残留物の定量的評価
  • ISO 4735, 柑橘類の油 — 紫外分光光度分析による CD 値の決定
  • ISO 11024-1, エッセンシャルオイル — クロマトグラフィープロファイルに関する一般的なガイダンス — Part 1: 規格で提示するためのクロマトグラフィープロファイルの準備
  • ISO 11024-2, エッセンシャル オイル — クロマトグラフィー プロファイルに関する一般的なガイダンス — Part 2: エッセンシャル オイルのサンプルのクロマトグラフィー プロファイルの利用

3 用語と定義

この文書の目的上、次の用語と定義が適用されます。

3.1

ライム油(コールドプレス)、メキシコタイプ(タイプA)

ミカン科のCitrus aurantifolia (Christm.) Swingleの果実全体を粉砕して得られる水、果汁および油のエマルションを遠心分離して得られる精油

3.2

ライム油(コールドプレス)、メキシコタイプ(タイプB)

ミカン科のCitrus aurantifolia (Christm.) Swingleの果実の皮をすりおろすおよび/または圧搾し、水の存在下で得られた水と油のエマルションを遠心分離することによって得られる精油。

注記 1:主な生産地域はメキシコ、中米諸国およびカリブ海の島々である。

注記 2: CAS 番号については、ISO/TR 21092 を参照。

参考文献

1ISO/TR 11018:1997, エッセンシャルオイル — 引火点の測定に関する一般的なガイダンス
2ISO/TR 21092, -1)エッセンシャルオイル - 特性評価

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 3809 was prepared by Technical Committee ISO/TC 54, Essential oils.

This third edition cancels and replaces the second edition (ISO 3809:1987), which has been technically revised.

1 Scope

This International Standard specifies certain char­act­eristics of the oil of lime (cold pressed), Mexican type [Citrus aurantifolia (Christm.) Swingle], in order to facilitate assessment of its quality.

2 Normative references

The following referenced documents are indispen­sable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

  • ISO/TR 210, Essential oils — General rules for packaging, conditioning and storage
  • ISO/TR 211, Essential oils — General rules for labelling and marking of containers
  • ISO 212, Essential oils — Sampling
  • ISO 279, Essential oils — Determination of relative density at 20 °C — Reference method
  • ISO 280, Essential oils — Determination of refractive index
  • ISO 592, Essential oils — Determination of optical rotation
  • ISO 1271, Essential oils — Determination of carbonyl value — Free hydroxylamine method
  • ISO 4715, Essential oils — Quantitative evaluation of residue on evaporation
  • ISO 4735, Oils of citrus — Determination of CD value by ultraviolet spectrophotometric analysis
  • ISO 11024-1, Essential oils — General guidance on chromatographic profiles — Part 1: Preparation of chromatographic profiles for presentation in standards
  • ISO 11024-2, Essential oils — General guidance on chromatographic profiles — Part 2: Utilization of chromatographic profiles of samples of essential oils

3 Terms and definitions

For the purposes of this document, the following terms and definitions apply.

3.1

oil of lime (cold pressed), Mexican type (type A)

essential oil obtained by centrifuging the emulsion of water, juice and oil obtained by crushing the whole fruits of Citrus aurantifolia (Christm.) Swingle, of the Rutaceae family

3.2

oil of lime (cold pressed), Mexican type (type B)

essential oil obtained by grating and/or squeezing the peel of fruits of Citrus aurantifolia (Christm.) Swingle, of the Rutaceae family, in the presence of water, followed by centrifuging the resulting emulsion of water and oil

Note 1 to entry: The principal areas of production are Mexico, the countries of Central America and the islands of the Caribbean.

Note 2 to entry: For information on the CAS number, see ISO/TR 21092.

Bibliography

1ISO/TR 11018:1997, Essential oils — General guidance on the determination of flashpoint
2ISO/TR 21092,— 1) , Essential oils — Characterization