ISO 3848:2016 シトロネラのエッセンシャルオイル、ジャワタイプ | ページ 2

※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。

序文

ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。

この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)

このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)

このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。

適合性評価に関連する ISO 固有の用語と表現の意味に関する説明、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、次の URL を参照してください: www.iso .org/iso/foreword.html .

この文書を担当する委員会は、ISO/TC 54, エッセンシャル オイルです。

この第 3 版は、技術的に改訂された第 2 版 (ISO 3848:2001) を取り消して置き換えるものです。また、技術正誤表 ISO 3848:2001/Cor.1:2002 も組み込まれています。

1 スコープ

この文書は、その品質の評価を容易にするために、ジャワ型シトロネラのエッセンシャル オイルの特定の特性を指定します。

2 参考文献

以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、本文で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。

  • ISO/TS 210, エッセンシャル オイル — 包装、コンディショニング、および保管に関する一般規則
  • ISO/TS 211, エッセンシャル オイル — 容器のラベル付けとマーキングに関する一般規則
  • ISO 212, エッセンシャル オイル — サンプリング
  • ISO 279, エッセンシャル オイル — 20 °C での相対密度の測定 — 参照方法
  • ISO 280, エッセンシャル オイル — 屈折率の測定
  • ISO 592, エッセンシャル オイル — 旋光度の測定
  • ISO 875, エッセンシャル オイル — エタノール中の混和性の評価
  • ISO 1102, エッセンシャル オイル — クロマトグラフィー プロファイルに関する一般的なガイダンス

3 用語と定義

このドキュメントでは、次の用語と定義が適用されます。

ISO および IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。

3.1

シトロネラのエッセンシャルオイル、ジャワタイプ

東南アジア、中国、インド、インドネシア、中南米で栽培されているCymbopogon winterianus Jowitt の生または部分的に乾燥した地上部の水蒸気蒸留によって得られる精油

注記1 CAS番号に関する情報については、ISO/TR 21092を参照。

参考文献

[1]ISO 3218, エッセンシャル オイル — 命名法の原則
[2]ISO/TR 11018, エッセンシャル オイル — 引火点の決定に関する一般的なガイダンス
[3]ISO/TR 21092, エッセンシャル オイル - 特性評価

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).

Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.

For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html .

The committee responsible for this document is ISO/TC 54, Essential oils.

This third edition cancels and replaces the second edition (ISO 3848:2001) which has been technically revised. It also incorporates the Technical Corrigendum ISO 3848:2001/Cor.1:2002.

1 Scope

This document specifies certain characteristics of the essential oil of citronella, Java type, in order to facilitate assessment of its quality.

2 Normative references

The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

  • ISO/TS 210, Essential oils — General rules for packaging, conditioning and storage
  • ISO/TS 211, Essential oils — General rules for labelling and marking of containers
  • ISO 212, Essential oils — Sampling
  • ISO 279, Essential oils — Determination of relative density at 20 °C — Reference method
  • ISO 280, Essential oils — Determination of refractive index
  • ISO 592, Essential oils — Determination of optical rotation
  • ISO 875, Essential oils — Evaluation of miscibility in ethanol
  • ISO 11024 (all parts), Essential oils — General guidance on chromatographic profiles

3 Terms and definitions

For the purposes of this document, the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

3.1

essential oil of citronella, Java type

essential oil obtained by steam distillation of the aerial parts, fresh or partially dried, of Cymbopogon winterianus Jowitt, cultivated in South-East Asia, China, India, Indonesia, Central and South America

Note 1 to entry: For information on the CAS number, see ISO/TR 21092.

Bibliography

[1]ISO 3218, Essential oils — Principles of nomenclature
[2]ISO/TR 11018, Essential oils — General guidance on the determination of flashpoint
[3]ISO/TR 21092, Essential oils — Characterization