※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に回覧されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 3860 は、技術委員会 ISO/TC 29, 小型工具、小委員会 SC 2, 高速度鋼切削工具およびその付属品によって作成されました。
この第 2 版は、第 1 版 (ISO 3860:1976) を取り消して置き換えるものであり、そのマイナー リビジョンを構成します。特に、規範的な参照が更新され、公差クラスの表示が ISO 2768-1 および ISO 2768-2 に従って提供されています。
1 スコープ
この国際規格は、キー ドライブを備えた一定のプロファイルを持つボア フォーム フライスの寸法を指定します。
この国際規格は、次の 3 種類のキー ドライブ付きボア カッターを扱います。
- 凸面フライス;
- 凹面フライス;
- 角丸カッター。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 240:1994, フライスカッター — カッターアーバーまたはカッターマンドレルの互換性寸法
- ISO 2768-1, 一般公差 — 1: 個々の公差表示のない直線寸法と角度寸法の公差
- ISO 2768-2, 一般公差 — 2: 個々の公差表示のない形体の幾何公差
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 3860 was prepared by Technical Committee ISO/TC 29, Small tools, Subcommittee SC 2, High speed steel cutting tools and their attachments.
This second edition cancels and replaces the first edition (ISO 3860:1976), of which it constitutes a minor revision. In particular, the normative references have been updated and the indications of the tolerance classes are given in accordance with ISO 2768-1 and ISO 2768-2.
1 Scope
This International Standard specifies the dimensions of bore form milling cutters with a constant profile with key drive.
This International Standard deals with the following three types of bore cutters with key drive:
- convex milling cutters;
- concave milling cutters;
- corner-rounding cutters.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 240:1994, Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels
- ISO 2768-1, General tolerances — 1: Tolerances for linear and angular dimensions without individual tolerance indications
- ISO 2768-2, General tolerances — 2: Geometrical tolerances for features without individual tolerance indications