この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化機関 (ISO 加盟団体) の世界的な連合体です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。
国際規格 ISO 3952/3 は、技術委員会 ISO/TC 10, 技術図面によって開発され、1977 年 12 月に加盟団体に配布されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | イタリア | スペイン |
| ベルギー | 韓国 | スウェーデン |
| カナダ | メキシコ | 七面鳥 |
| チェコスロバキア | オランダ | イギリス |
| フィンランド | ニュージーランド | アメリカ合衆国 |
| ドイツ、フランス | ポーランド | ソビエト連邦 |
| インド | ルーマニア | ユーゴスラビア |
| アイルランド | 南アフリカ共和国 |
以下の国の加盟団体は、技術的な理由からこの文書に不承認を表明しました。
フランス
日本
導入
この国際規格の目的は、運動図用の図記号システムを作成することです。このようなシステムの作成により、運動図の作成が簡素化され、さまざまな国の専門家によるそのような図の実行と理解が容易になります。
適用範囲と分野
この国際規格は、産業のあらゆる部門における製品の運動図の要素の図記号を確立します。この国際規格によって確立された記号は、技術文書や教育文献の図で使用されます。
この国際規格は、次の 3 部構成で発行されます。
- Part 1
- 1機構のリンクの動き
- 2つのキネマティックペア
- 3コンポーネントのリンクと接続
- 4バーとそのリンクの結合
Part 2
- 5摩擦と歯車の機構
- 6カム機構
Part 3
- 7ジュネーブ機構とラチェット機構
- 8 つのカップリング、クラッチ、ブレーキ
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that commit-tee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 3952/3 was developed by Technical Committee ISO/TC 10, Technical drawings, and was circulated to the member bodies in December 1977.
It has been approved by the member bodies of the following countries:
| Australia | Italy | Spain |
| Belgium | Korea, Rep. of | Sweden |
| Canada | Mexico | Turkey |
| Czechoslovakia | Netherlands | United Kingdom |
| Finland | New Zealand | USA |
| Germany, F.R. | Poland | USSR |
| India | Romania | Yugoslavia |
| Ireland | South Africa, Rep. of |
The member bodies of the following countries expressed disapproval of the document on technical grounds:
France
Japan
Introduction
The purpose of this International Standard is the creation of a system of graphical symbols for kinematic diagrams. The cre-ation of such a system will simplify the preparation of kinematic diagrams and will facilitate the execution and under-standing of such diagrams by specialists of different countries.
Scope and field of application
This International Standard establishes the graphical symbols for elements of kine-matic diagrams of products in all branches of industry. The symbols established by this International Standard are to be used on diagrams in technical documentation, as well as in technical and educational literature.
This International Standard is being pub-lished in three parts, as follows:
- Part 1
- 1 Motion of links of mechanisms
- 2 Kinematic pairs
- 3 Links and connections of their com-ponents
- 4 Linkage of bars and their links
Part 2
- 5 Friction and gear mechanisms
- 6 Cam mechanisms
Part 3
- 7 Geneva and ratchet mechanisms
- 8 Couplings, clutches and brakes