※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に回覧されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 3977-2 は、技術委員会 TC 192, ガスタービンによって作成されました。
この ISO 3977-2 の初版は、他の部分と共に、技術的に改訂された ISO 3977:1991 を廃止し、置き換えます。
ISO 3977 は、一般的なタイトルの下に、次の部分で構成されています。ガスタービン-調達
- Part 1: 一般的な紹介と定義
- Part 2: 標準参照条件と定格
- Part 3: 機械駆動装置および電気駆動装置の基本要件
- Part 4: 包装および補助装置
- Part 5: コントロールと計装
その他のパーツは準備中です。
1 スコープ
ISO 3977 のこのパートでは、ガスタービンの標準参照条件と ISO 標準定格を指定しています。
2 規範的参照
次の規格には、このテキストでの参照を通じて、ISO 3977 のこの部分の規定を構成する規定が含まれています。発行の時点で、示された版は有効でした。すべての規格は改訂される可能性があり、ISO 3977 のこの部分に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 2314:1989, ガスタービン - 受け入れテスト。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 3977-2 was prepared by Technical Committee TC 192, Gas turbines.
This first edition of ISO 3977-2, together with the other parts, cancels and replaces ISO 3977:1991, which has been technically revised.
ISO 3977 consists of the following parts, under the general title: Gas turbines — Procurement
- Part 1: General introduction and definitions
- Part 2: Standard reference conditions and ratings
- Part 3: Basic requirements for mechanical drive and electric drive
- Part 4: Packaging and auxiliary equipment
- Part 5: Controls and instrumentation
Further parts are in preparation.
1 Scope
This part of ISO 3977 specifies the standard reference conditions and ISO standard ratings for gas turbines.
2 Normative reference
The following standard contains provisions which, through reference in this text, constitute provisions of this part of ISO 3977. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this part of ISO 3977 are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 2314:1989, Gas turbines — Acceptance tests.