※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 4027 は ISO/TC 2, ファスナー技術委員会によって作成されました。
この第 3 版は、技術的に改訂された第 2 版 (ISO 4027:1993) を廃止し、置き換えるものです。
1 スコープ
この国際規格は、製品グレード A の、M1.6 から M24 までのねじ山を備えた円錐形の六角穴付き止めねじの特性を指定します。
特別な場合に、この国際規格に記載されているもの以外の仕様が必要な場合は、既存の国際規格 (ISO 261, ISO 898-5, ISO 965-2, ISO 3506-3, ISO 4759-1 など) から選択する必要があります。 。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 225, ファスナー - ボルト、ネジ、スタッド、ナット - 寸法の記号と指定
- ISO 261, ISO 汎用メートルねじ - 一般計画
- ISO 898-5, 炭素鋼および合金鋼で作られた留め具の機械的特性 - Part 5: 引張応力を受けていない止めねじおよび同様のねじ付き留め具
- ISO 965-2, ISO 汎用メートルねじ - 公差 - Part 2: 汎用おねじおよびめねじのサイズ制限 - 中品質
- ISO 965-3, ISO 汎用メートルねじ - 公差 - Part 3: 構造上のねじ山の偏差
- ISO 3269, ファスナー - 受け入れ検査
- ISO 3506-3, 耐食性ステンレス鋼ファスナーの機械的特性 - Part 3: 引張応力を受けていない止めねじおよび同様のファスナー
- ISO 4042, ファスナー - 電気めっきコーティング
- ISO 4759-1, 締結部品の公差 — Part 1: ボルト、ネジ、スタッド、ナット — 製品グレード A, B, および C
- ISO 6157-1, ファスナー - 表面の不連続性 - Part 1: 一般要件のボルト、ネジ、スタッド
- ISO 8839, 締結具の機械的特性 - 非鉄金属製のボルト、ネジ、スタッド、ナット
- ISO 8992, ファスナー - ボルト、ネジ、スタッド、ナットの一般要件
- ISO 10683, ファスナー - 非電解的に適用された亜鉛フレークコーティング
- ISO 23429, 六角ソケットのゲージング
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 4027 was prepared by Technical Committee ISO/TC 2, Fasteners.
This third edition cancels and replaces the second edition (ISO 4027:1993), which has been technically revised.
1 Scope
This International Standard specifies the characteristics of hexagon socket set screws with cone point and threads from M1,6 up to and including M24 and of product grade A.
If, in special cases, specifications other than those listed in this International Standard are required, they should be selected from existing International Standards, e.g. ISO 261, ISO 898-5, ISO 965-2, ISO 3506-3 and ISO 4759-1.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 225, Fasteners — Bolts, screws, studs and nuts — Symbols and designations of dimensions
- ISO 261, ISO general-purpose metric screw threads — General plan
- ISO 898-5, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners not under tensile stresses
- ISO 965-2, ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality
- ISO 965-3, ISO general purpose metric screw threads — Tolerances — Part 3: Deviations for constructional screw threads
- ISO 3269, Fasteners — Acceptance inspection
- ISO 3506-3, Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress
- ISO 4042, Fasteners — Electroplated coatings
- ISO 4759-1, Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
- ISO 6157-1, Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements
- ISO 8839, Mechanical properties of fasteners — Bolts, screws, studs and nuts made of non-ferrous metals
- ISO 8992, Fasteners — General requirements for bolts, screws, studs and nuts
- ISO 10683, Fasteners — Non-electrolytically applied zinc flake coatings
- ISO 23429, Gauging of hexagon sockets