※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の策定作業は、ISO 技術委員会を通じて実施されます。技術委員会が承認された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。
国際規格 ISO 4101 は、技術委員会 ISO/TC 105, スチール ワイヤ ロープによって開発され、1982 年 10 月にメンバー団体に回覧されました。
以下の国の加盟団体によって承認されています。
| オーストリア | インド | スウェーデン |
| カナダ | イスラエル | スイス |
| 中国 | イタリア | イギリス |
| チェコスロバキア | 大韓民国 | タイ |
| エジプト、アラブ共和国 | オランダ | ソビエト連邦 |
| フランス | ポーランド | |
| ドイツ、フランス | スペイン |
次の国のメンバー団体は、技術的な理由で文書の不承認を表明しました。
オーストラリア
ベルギー
南アフリカ共和国
1 スコープ
この国際規格は、エレベーター ロープのみに使用される鋼線の仕様を示しています。
それは次のように述べています。
- 寸法公差;
- 機械的特性。
3 参考文献
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been authorized has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 4101 was developed by Technical Committee ISO/TC 105, Steel wire ropes, and was circulated to the member bodies in October 1982.
It has been approved by the member bodies of the following countries:
| Austria | India | Sweden |
| Canada | Israel | Switzerland |
| China | Italy | United Kingdom |
| Czechoslovakia | Korea, Rep. of | Thailand |
| Egypt, Arab Rep. of | Netherlands | USSR |
| France | Poland | |
| Germany, F. R. | Spain |
The member bodies of the following countries expressed disapproval of the document on technical grounds:
Australia
Belgium
South Africa, Rep. of
1 Scope
This International Standard gives the specifications for steel wire to be used for elevator ropes only.
It lays down:
- the dimensional tolerances;
- the mechanical characteristics.
3 References
- ISO 89, Steel — Tensile testing of wire.
- ISO 136, Steel — Simple torsion testing of wire.
- ISO 144, Steel — Reverse bend testing of wire.
- ISO 2701, Drawn wire for general purpose non-alloy steel wire ropes — Terms of acceptance.