※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 4751-3 は、技術委員会 ISO/TC 10, 技術図面、製品定義および関連文書、小委員会 SC 8, 構造文書によって作成されました。
ISO 4157 は、一般的なタイトルである建設図面 - 指定システムの下にある次の部分で構成されています。
- Part 1: 建物および建物の一部
- Part 2: 部屋の名前と番号
- Part 3: 部屋の識別子
1 スコープ
ISO 4157 のこの部分は、部屋識別子による建物内の部屋、エリア、スペース、およびボイドの指定システムの要件を確立します。これは、プロジェクトのライフ サイクル全体、つまり、構想、プログラミング、計画、建設、保守、改造、解体の各段階を通じて、プロジェクト内の部屋を識別するための新しい指定概念を導入しています。
2 参考文献
以下の規格には規定が含まれており、このテキストで参照することにより、ISO 4157 のこの部分の規定を構成します。発行の時点で、示された版は有効でした。すべての規格は改訂される可能性があり、ISO 4157 のこの部分に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 4157-1:1998, 建設図面 — 指定システム — 1: 建物および建物の一部。
- ISO 4157-2:1998, 建設図面 — 指定システム — 2: 部屋の名前と番号。
3 つの定義
ISO 4157 のこの部分の目的のために、ISO 4157-1 で与えられた定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 4751-3 was prepared by Technical Committee ISO/TC 10, Technical drawings, product definition and related documentation, Subcommittee SC 8, Construction documentation.
ISO 4157 consists of the following parts, under the general title Construction drawings — Designation systems:
- Part 1: Buildings and parts of buildings
- Part 2: Room names and numbers
- Part 3: Room identifiers
1 Scope
This part of ISO 4157 establishes requirements for designation systems for rooms, areas, spaces, and voids in buildings by room identifiers. It introduces a new designation concept intended for identification of rooms in a project throughout its life cycle, i.e. the conception, programming, planning, erection, maintenance, remodelling and demolition phases.
2 Normative references
The following standards contain provisions, which through reference in this text, constitute provisions of this part of ISO 4157. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO 4157 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 4157-1:1998, Construction drawings — Designation systems — 1: Buildings and parts of buildings.
- ISO 4157-2:1998, Construction drawings — Designation systems — 2: Room names and numbers.
3 Definitions
For the purposes of this part of ISO 4157, the definitions given in ISO 4157-1 apply.