※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 4171 は、技術委員会 ISO/TC 20, 航空機および宇宙船、小委員会 SC 9, 航空貨物および地上機器によって作成されました。
この第 2 版は、技術的な改訂を構成する第 1 版 (ISO 4171:1980) を廃止し、置き換えるものです。
1 スコープ
この国際規格は、ISO 4170 の要件を満たすネットを使用して航空機で貨物を輸送するために使用されるパレットの寸法、構造、および環境要件を確立します。
2 規範的参照
以下の規格には、本文中の参照を通じてこの国際規格の条項を構成する条項が含まれています。発行時点では、示されているエディションは有効です。すべての規格は改訂される可能性があり、この国際規格に基づく協定の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 4116:1986, 航空貨物機器 - 航空機ユニット負荷装置との互換性に関する地上機器要件。
- ISO 4170:1987, 航空貨物機器 - インターラインパレットネット。
- ISO 7166:1985, 航空機 — 旅客機器および貨物拘束用のレールとスタッドの構成。
- ISO 8097:1993, 航空機 — 認定された航空貨物ユニット搭載装置の最低耐空要件とテスト条件。
- IATA, ユニット ロード デバイス (ULD) テクニカル マニュアル、第 5 版。 1)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 4171 was prepared by Technical Committee ISO/TC 20, Aircraft and space vehicles, Sub-Committee SC 9, Air cargo and ground equipment.
This second edition cancels and replaces the first edition (ISO 4171:1980), of which it constitutes a technical revision.
1 Scope
This International Standard establishes dimensional, structural and environmental requirements for pallets used to transport cargo in aircraft using nets meeting the requirements of ISO 4170.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 4116:1986, Air cargo equipment — Ground equipment requirements for compatibility with aircraft unit load devices.
- ISO 4170:1987, Air cargo equipment — Interline pallet nets.
- ISO 7166:1985, Aircraft — Rail and stud configuration for passenger equipment and cargo restraint.
- ISO 8097:1993, Aircraft — Minimum airworthiness requirements and test conditions for certified air cargo unit load devices.
- IATA, Unit Load Devices (ULD) Technical Manual, 5th edition. 1)