※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 4172 は、技術委員会 ISO/TC 10, 技術図面、製品定義、および関連文書によって作成されました。
この第 2 版は、第 2 節および第 4.3 節が技術的に改訂された第 1 版 (ISO 4172:1981) を取り消し、置き換えます。
1 スコープ
この国際規格は、建築および土木工事用のプレハブ構造物の現地組立を目的とした作業図面の作成に関する一般規則を規定しています。
2 参考文献
次の規格には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。発行の時点で、示されている版は有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 128:1982, テクニカル ドローイング — プレゼンテーションの一般原則。
- ISO 129:1985, 技術図面 - 寸法 - 一般原則、定義、実行方法、および特別な表示。
- ISO 1046:1973, 建築および建築図面 — 語彙。
- ISO 2444:1988, 建物のジョイント — 語彙。
- ISO 2445:1972, 建物のジョイント — 設計の基本原則。
- ISO 2553:1984, 溶接 - 図面上の記号表現。
- ISO 4068:1978, 建物および土木工学の図面 — 基準線。
- ISO 4157-1:1980, 建築図面 — 1: 建物及び建物の一部の指定。
- ISO 5455:1979, 技術図面 — スケール。
- ISO 5457:1980, 技術図面 — 図面シートのサイズとレイアウト。
- ISO 6284:1985, Tolerances for building - Indication of tolerances on building and construction drawing.
- ISO 7200:1984, 技術図面 — 表題欄。
- ISO 7437:1990, 技術図面 — 建設図面 — プレハブ構造コンポーネントの生産図面の実行に関する一般規則。
- ISO 8048:1984, 技術図面 - 建設図面 - ビュー、セクション、カットの表現。
3 つの定義
この国際規格の目的のために、次の定義が適用されます。
3.1
プレハブ構造
プレハブの構造コンポーネントから建てられた構造。
3.2
プレハブ構造部品
専用部品として建設現場に納入されるプレハブ構造のコンポーネント。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 4172 was prepared by Technical Committee ISO/TC 10, Technical drawings, product definition and related documentation.
This second edition cancels and replaces the first edition (ISO 4172:1981), clause 2 and subclause 4.3 of which have been technically revised.
1 Scope
This International Standard specifies general rules for the preparation of working drawings intended for the field assembly of prefabricated structures for building and civil engineering works.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 128:1982, Technical drawings — General principles of presentation.
- ISO 129:1985, Technical drawings — Dimensioning — General principles, definitions, methods of execution and special indications.
- ISO 1046:1973, Architectural and building drawings — Vocabulary.
- ISO 2444:1988, Joints in building — Vocabulary.
- ISO 2445:1972, Joints in building — Fundamental principles for design.
- ISO 2553:1984, Welds — Symbolic representation on drawings.
- ISO 4068:1978, Building and civil engineering drawings — Reference lines.
- ISO 4157-1:1980, Building drawings — 1: Designation of buildings and parts of buildings.
- ISO 5455:1979, Technical drawings — Scales.
- ISO 5457:1980, Technical drawings — Sizes and layout of drawing sheets.
- ISO 6284:1985, Tolerances for building — Indication of tolerances on building and construction drawings.
- ISO 7200:1984, Technical drawings — Title blocks.
- ISO 7437:1990, Technical drawings — Construction drawings — General rules for execution of production drawings for prefabricated structural components.
- ISO 8048:1984, Technical drawings — Construction drawings — Representation of views, sections and cuts.
3 Definitions
For the purposes of this International Standard, the following definitions apply.
3.1
prefabricated structure
Structure erected out of prefabricated structural components.
3.2
prefabricated structural component
Component of a prefabricated structure delivered to the construction site as a purpose-made part.