この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が認可された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。
国際規格 ISO 4220 は ISO/TC 146大気質技術委員会によって開発され、1982 年 10 月に加盟団体に配布されました。
以下の国の加盟団体によって承認されています。
| オーストリア | ハンガリー | スペイン |
| ベルギー | インド | スイス |
| ブラジル | イタリア | タイ |
| 中国 | 日本 | イギリス |
| チェコスロバキア | オランダ | アメリカ合衆国 |
| エジプト、アラブ共和国 | ノルウェー | |
| ドイツ、フランス | 南アフリカ共和国 |
以下の国の加盟団体は、技術的な理由からこの文書に不承認を表明しました。
オーストラリア
カナダ
1 適用範囲と適用分野
この国際規格は、指示薬または電位差測定手順を使用して終点を検出する、周囲空気のガス状酸汚染指数 (第 3 項を参照) を決定するための滴定方法を規定しています。
この方法は、30 μg/m 3を超える二酸化硫黄の質量濃度に相当する周囲空気の酸性ガス汚染指数の決定に適用できます。
この方法に従って得られる結果は、指定されたサンプリングと条件下で測定されると考えられる酸性およびアルカリ性の両方のガス状大気汚染物質の分析量に依存します。
サンプリング期間は 24 時間または 48 時間です。
この方法は二酸化硫黄に特有のものではありません。
2 参考資料
- ISO 4219, 大気質 – 周囲空気中のガス状硫黄化合物の測定 – サンプリング装置。
3 定義
酸性ガスの大気汚染指数
従来、二酸化硫黄の観点から表される、空気サンプルの水溶性「酸性」ガス成分の濃度。
注記 1:ガス状の酸性大気汚染指数は、粒子状の酸性大気汚染物質も含まれるため、総酸性度指数ではありません。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been authorized has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 4220 was developed by Technical Committee ISO/TC 146, Air quality, and was circulated to the member bodies in October 1982.
It has been approved by the member bodies of the following countries:
| Austria | Hungary | Spain |
| Belgium | India | Switzerland |
| Brazil | Italy | Thailand |
| China | Japan | United Kingdom |
| Czechoslovakia | Netherlands | USA |
| Egypt, Arab Rep. of | Norway | |
| Germany, F.R. | South Africa, Rep. of |
The member bodies of the following countries expressed disapproval of the document on technical grounds:
Australia
Canada
1 Scope and field of application
This International Standard specifies a titrimetric method for the determination of a gaseous acid pollution index (see clause 3) of ambient air, using an indicator or a potentiometric procedure to detect the end-point.
The method is applicable to the determination of a gaseous acid pollution index of ambient air equivalent to mass concentrations of sulfur dioxide higher than 30 μg/m3.
The results obtained following this method depend on the amounts of both acid and alkaline gaseous air pollutants which are likely to be determined under the specified sampling and analytical conditions.
The sampling period is 24 or 48 h.
The method is not specific for sulfur dioxide.
2 Reference
- ISO 4219, Air quality — Determination of gaseous sulphur compounds in ambient air — Sampling equipment.
3 Definition
gaseous acid air pollution index
Concentration of watersoluble"acidic" gaseous components of the air sample expressed conventionally in terms of sulfur dioxide.
Note 1 to entry: The gaseous acid air pollution index is not a total acidity index as this would also include particulate acid air pollutants.