※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO メンバー団体) の世界的な連合です。国際規格の策定作業は、ISO 技術委員会を通じて実施されます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。
国際規格 ISO 4297 は、技術委員会 ISO/TC 65, マンガンおよびクロム鉱石によって開発され、1977 年 4 月にメンバー団体に回覧されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | ハンガリー | ポーランド |
| オーストリア | インド | ルーマニア |
| ブラジル | イラン | 南アフリカ共和国 |
| ブルガリア | アイルランド | 七面鳥 |
| チェコスロバキア | イタリア | イギリス |
| フランス | 日本 | ソビエト連邦 |
| ドイツ | メキシコ |
この文書の不承認を表明した加盟団体はありませんでした。
1 適用範囲と適用分野
この国際規格は、マンガン鉱石および精鉱の化学分析方法に関する一般的な指示を与えます。
2 参照
- ISO 310, マンガン鉱 — 分析サンプル中の吸湿性水分含有量の測定 — 重量法。
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 4297 was developed by Technical Committee ISO/TC 65, Manganese and chromium ores, and was circulated to the member bodies in April 1977.
It has been approved by the member bodies of the following countries:
| Australia | Hungary | Poland |
| Austria | India | Romania |
| Brazil | Iran | South Africa, Rep. of |
| Bulgaria | Ireland | Turkey |
| Czechoslovakia | Italy | United Kingdom |
| France | Japan | U.S.S.R. |
| Germany | Mexico |
No member body expressed disapproval of the document.
1 SCOPE AND FIELD OF APPLICATION
This International Standard gives general instructions concerning the methods of chemical analysis of manganese ores and concentrates.
2 REFERENCE
- ISO 310, Manganese ores — Determination of hygroscopic moisture content in analytical samples — Gravimetric method.